the socket-outlet is located/installed near the equipment and is
easily accessible.
- Use only specified Panasonic AC adaptor PQLV202 (Order No.
PQLV202W).
- If the indicator does not light green, see the Installation/
Troubleshooting.
- A noise can be heard during pan/tilt operation. This is normal.
4. Hook the power cord to the Hook for Power Cord.
7.3. SETTING UP THE CAMERA TO VIEW ON THE LAN
Setup CD-ROM allows you to easily set up the camera.
Note:
- To avoid any possible problems, temporarily disable any firewall or
antivirus software.
- This procedure explains installation of the camera on the same network
that your PC is part of.
- Before proceeding, close your web browser.
- See the Operating Instructions on the Setup CD-ROM for details.
- To set the Wireless Configuration, the wireless LAN settings of your
router-SSID, communication mode and encryption etc.-are required.
(See your wireless router's manual for your reference to the wireless
LAN settings.)
- When there are some cameras or PCs that are communicating
wirelessly, the IP addresses may overlap and the camera may not be
able to communicate. See the Operating Instructions on the Setup CD-
20
Summary of Contents for BB-HCM371A - Outdoor Wireless Network Camera
