Panasonic BB-GT1500C Page 99 Operating Instructions Manual Download | Manualshive

Page: 99 / 108

background image

Useful Information

99

For product assistance, visit www.globarange.com

For

A

assistance, visit www.joip.com

* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson ([email protected])"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/

<<MD5>>
This software uses the Source Code of RSA Data Security, Inc. described in the
RFC1321 (MD5 Message-Digest Algorithm).
----------------------------------------------------------------
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All
rights reserved.

License to copy and use this software is granted provided that it
is identified as the "RSA Data Security, Inc. MD5 Message-Digest
Algorithm" in all material mentioning or referencing this software
or this function.

License is also granted to make and use derivative works provided
that such works are identified as "derived from the RSA Data
Security, Inc. MD5 Message-Digest Algorithm" in all material
mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either
the merchantability of this software or the suitability of this
software for any particular purpose. It is provided "as is"

GT15xxC.book Page 99 Tuesday, July 24, 2007 7:17 PM

«
...
97
98
99
100
101
...
»

Summary of Contents for BB-GT1500C













































































































Reviews:

No comments

Related manuals for BB-GT1500C

Brand: Xblue Networks Pages: 32

Brand: Unify Pages: 218

Brand: Panasonic Pages: 120

Brand: MALUX Pages: 16

Brand: TransTel Communications Pages: 48

Brand: MOBICEL Pages: 69

Brand: Brookstone Pages: 12

Bamboo BLP7670-001

Brand: Blaupunkt Pages: 5

Brand: GE Pages: 1

Brand: GE Pages: 4

BedroomPhone 00023810

Brand: GE Pages: 2

BedroomPhone 16224640

Brand: GE Pages: 2

Brand: GE Pages: 2

BedroomPhone 00004548

Brand: GE Pages: 2

Brand: GE Pages: 4

Brand: GE Pages: 2

Brand: GE Pages: 17

Brand: GE Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands