Panasonic BB-GT1500C Page 98 Operating Instructions Manual Download | Manualshive

Page: 98 / 108

background image

Useful Information

98

For product assistance, visit www.globarange.com

For

A

assistance, visit www.joip.com

* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ===========================================================
=========
*
* This product includes cryptographic software written by Eric Young
* ([email protected]). This product includes software written by Tim
* Hudson ([email protected]).
*
*/

Original SSLeay License
-----------------------

/* Copyright (C) 1995-1998 Eric Young ([email protected])
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young ([email protected]).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson ([email protected]).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young ([email protected])"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).

GT15xxC.book Page 98 Tuesday, July 24, 2007 7:17 PM

«
...
96
97
98
99
100
...
»

Summary of Contents for BB-GT1500C













































































































Reviews:

No comments

Related manuals for BB-GT1500C

Brand: NEC Pages: 7

Brand: NEC Pages: 2

Brand: NEC Pages: 3

Brand: Samsung Pages: 2

Brand: Samsung Pages: 51

OFFICESERV 500 Series

Brand: Samsung Pages: 124

Brand: Samsung Pages: 14

Brand: Samsung Pages: 287

Brand: Unify Pages: 19

Brand: Panasonic Pages: 242

CRUISER2 HSF002

Brand: Jabra Pages: 2

Brand: TIE Pages: 28

Brand: Telco Pages: 15

Brand: Panasonic Pages: 48

3C 4G TECH ACCESSORIES SET

Brand: make it real Pages: 2

Amplidect 295 SOS-Pro

Brand: Geemarc Pages: 2

Brand: Geemarc Pages: 31

Brand: Geemarc Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands