34
Replacement of consumable parts
Replacing the battery
The battery lasts for about 5 years.
The pan/tilt head stores the preset positions, limiter positions and other data in its memory. Although this data is retained even
after the power has been turned off, it will be lost when the power is turned off once the battery has reached the end of its
service life.
Replace the battery once it has lost its effectiveness. (The pan/tilt head uses a CR2032 manganese dioxide-lithium battery.)
Removing the battery
Remove the 5 cover screws, and remove the sunshade cover.
Remove the 5 cover screws, and remove the main unit cover.
Press the battery in the direction shown by the arrow
in the figure, and pull the battery out to remove it completely.
Installing the new battery
Position the new battery with its “+” side facing down, insert one end into the holder in the direction indicated
by the arrow
, and push it into place.
Attach the main unit cover and sunshade cover using the 5 screws for each cover.
Lithium battery
Main unit cover
Sunshade cover
