3
Clamping torque
For proper clamping torque, securely attach the
screws using the specified tools, spring washers,
flat washers, and nuts from the table to the right.
Screw
diameter
Clamping torque
M6
490N
•
cm (50 kgf
•
cm)
M8
784N
•
cm (80 kgf
•
cm)
Point the end marked “
FRONT” on the installation surface bracket toward the shooting direction.
Ensure that the cables have been connected to the unit’s rear panel, and provide enough clearance around the unit so that it
will be able to swivel unhindered.
The dimensions indicated by ( ) in the figure below indicate the position where the installation surface bracket is mounted.
Check the positions of the mounting screw holes.
(3-5/8 [92.5])
(4-1/2 [114.5])
7-1/16 [180]
7-1/4 [184]
5-1/2 [139]
4-1/2 [115]
(6-11/16 [170])
(7-5/16 [185])
(2-13/16
[71.5])
Hole used for mounting the
installation surface bracket
Hole through which the cables
are routed (reference)
Overhang range of the unit
Unit mounting range
Swivel range
Unit: inch [mm]
9-1/16 [30]
(Area where the cables protrude)
9-5/8 [
45] (Area where the mounting br
ac
ket protr
udes)
Installation
