Panasonic AWE300S - SEPERATE CAMERA, Operating Instructions Manual

Page: 34 / 56

R B
R B
PED
TOTAL
PED
A
B
ATW
AWC
AUTO
HOLD
ABC
IRIS
MAN
AUTO
1000
S/S
ELC
500
100
OFF
SHUTTER SCENE
2 1
3
USER
SET
AUTO/ATW
PAINTING
GAIN
-32-
■
Setting and Changing of the
Setting (Halogen Mode, Fluores-
cent Mode, Outdoor Mode)
q
Video Level Adjustment
[Picture Level: –50 - +50]
Convergence level of AUTO IRIS/AUTO GAIN UP/
AUTO ND (ELC) can be adjusted.
w
Detecting Ratio Adjustment [Light PEAK/AVG:
P50 - A50]
The ratio of AUTO IRIS/AUTO GAIN UP/AUTO ND
(ELC) detected peak to average can be adjusted
within a predetermined range.
e
Photometric Measurement Method Setting [Light
Area: All, Center, Top cut, BTM cut, R/L cut
A photometric measurement method can be select-
ed for AUTO IRIS/AUTO GAIN UP/AUTO ND (ELC).
All: All the screen area is measured.
Center: The screen is measured mainly in the cen-
ter area, about one-third of both the top and bot-
tom and one-third of both the right and left por-
tions of the screen are excluded from measure-
ment.
Top cut: About one-third of the top part of the
screen is excluded from measurement.
BTM cut: About one-third of the bottom portion of
the screen is excluded from measurement.
r
Auto ND (ELC) Setting [Auto ND (ELC): ON/OFF]
ON:
The electronic shutter is controlled to automati-
cally adjust the luminance.
OFF: Luminance is not automatically adjusted by
the electronic shutter.
All Center Top cut BTM cut R/L cut
• ON is automatically selected when the electron-
ic shutter
@2
on the submenu [Other Set] is set
to [Auto ND]. OFF is selected when other than
[Auto ND] is selected.
• ON is selected when the SHUTTER switch is set
to [ELC] in RCU (RCB) mode, and OFF is select-
ed when it is set to other than [ELC].
Notes
SHUTTER
RCU (RCB)
R/L cut: About one-third of both the right and left
portions of the screen are excluded from mea-
surement.