71
Controls and settings from web screen
(continued)
Brightness
Use this to make the image darker.
It does not work during automatic
adjustments.
Use this to make the image lighter.
It does not work during automatic
adjustments.
Use this to switch the picture brightness
adjustment between auto and manual.
Control pad and its buttons
To adjust the image in the horizontal
or vertical direction (panning or
tilting), left-click the pad and the
buttons.
The more the outside of the pad
is clicked, the faster the camera
operates. Adjustment is also possible
by dragging the mouse.
Right-click the pad to initiate zooming
and focusing.
When the top half of the pad is
clicked in the up or down direction,
the zoom (magnification) is adjusted
in the Tele direction; conversely, when
the bottom half of the pad is clicked,
the zoom is adjusted in the Wide
direction.
When the left half of the pad is
clicked in the left or right direction,
the focus is adjusted in the Near
direction; conversely when the right
half of the pad is clicked, the focus is
adjusted in the Far direction.
The zooming can also be adjusted by
operating the mouse wheel.
●
When the mouse is used for dragging and
dropping from the control pad area to a position
outside this area, the panning, tilting and other
operations will not stop.
In a case like this, click the control pad area to stop
these operations.
Note
Speed
Use this to select the speed at which the
pan, tilt, zoom and focus operations are to
be performed.
Speed With Zoom POS.
“Off” or “On” is set here for the function used to adjust the
pan-tilt adjustment speed in conjunction with the zoom
magnification.
Off
The panning and tilting operations will not
become slower in the zoom status.
On
The panning and tilting operations will
become slower in the zoom status.
This function has no effect during preset operations.
Focus ADJ With PTZ.
“Off” or “On” is set here for the function which
compensates for out-of-focusing when it occurs during
panning, tilting or zooming operations.
Off
Out-of-focusing is not compensated.
On
Out-of-focusing is compensated.
When “Off” is set, adjust the focus as required after
zooming or set the focus to the auto mode.
This item can be selected only when “Manual” has been
selected as the “Focus Mode” setting.
Summary of Contents for AW-HE40HKE
Page 99: ...99 Memo ...
Page 100: ...Web Site http panasonic net Panasonic Corporation 2014 ...
