10
Shooting techniques for different targets (continued)
Shooting using the FUNCTION knob
The following types of recording can be carried out
using the FUNCTION knob.
Area auto focus function
•
Operates auto focus within an area frame
selected using the FUNCTION knob.
Area auto iris function
•
Automatically adjusts the iris value within an area
frame selected using the FUNCTION knob. This
function cannot be set when the FACE DETECT
function has been set.
Area luminance display
•
Displays an averaged luminance level within an
area frame selected using the FUNCTION knob.
1
Select the function from the FUNCTION
KNOB option (page 53) on the settings
menu SW MODE screen.
FOCUS: Area focus function and area focus
bar function (during MENU setting)
IRIS:
Area iris function and area iris meter
function (during MENU setting)
YGET:
Area luminance display
FOCUS/IRIS:
Simultaneous operation of the area
focus function and area iris function,
simultaneous operation of the area
focus bar function/area iris meter
function (during MENU setting)
FOCUS/YGET:
Simultaneous operation of area
focus function and area luminance
display, simultaneous operation
of area focus bar function (during
MENU setting)
2
Press the FUNCTION knob.
A white frame is displayed.
•
There is no change in the operation of the
•
camera other than the display of the frame.
3
Press the FUNCTION knob again.
The white frame turns yellow.
•
When the frame is yellow, the FUNCTION
•
knob function set via the MENU operates in
the area inside the frame.
Pressing the FUNCTION knob once more
•
returns the yellow frame to the white frame.
Switching AUTO/MANUAL for FOCUS/IRIS
•
is normally carried out in the same way.
The central luminance function does not
•
operate when the area luminance display is
operating.
If the FUNCTION knob is held down for more
•
than 2 seconds, the frame disappears and
the area function is switched off.
4
Move the FUNCTION knob up and down,
and right and left.
The white frame changes position. Move the
•
frame to the area you wish to select.
The area function does not operate during face
•
detection.
The area function exits when the power switch
•
is set to OFF or when the camera is switched
to playback mode.
Auto focus and auto iris may not be available
•
depending on lens used.
The area luminance, FOCUS BAR, and IRIS
•
METER functions are available regardless of
the lens used.
Summary of Contents for Avccam AG-AF100A Series
Page 51: ...Memo 51 ...
Page 126: ...2010 P ...
