10
Part Names and Functions
Part Names and Functions
Front panel
1
2
3
Power supply 1
Power supply 2
1 Alarm indicator <ALARM>
Lights up when the cooling fan of the Main Frame AV-HS60U1/AV-HS60U2 has stopped or when there are problems (voltage declines) with the
power supply. In such cases, an alarm message is displayed on the Menu Panel AV-HS60C3. For the redundant power supply model (AV-HS60U2),
an alarm will be displayed if both <POWER> switches of the power supply 1 and the power supply 2 have not turned on.
When an alarm has occurred, details of the problem can be checked from the <SYS> button on the top menu
→
[MAINTENANCE]
→
[Alarm] tab.
Alarm status can be output from the alarm output port of the <GPI IN> terminal on the Main Frame AV-HS60U1/AV-HS60U2 to external devices.
f
AV-HS60U1 does not have the alarm indicator for the power supply 2.
2 Power indicator <POWER>
Lights up when power is input into the <AC IN 1>/<AC IN 2> terminal and also when the <POWER> switches of the power supply 1 and the power
supply 2 are set to <ON>.
f
AV-HS60U1 does not have the power indicator for the power supply 2.
3 <POWER> switch
Turns power on/off.
f
The single power supply model (AV-HS60U1) does not have the <POWER> switch for the power supply 2.
f
When turning off the power of the redundant power supply model (AV-HS60U2), set both <POWER> switches for the power supply 1 and the
power supply 2 to <OFF>.
@
@
NOTE
t
When an alarm has occurred, stop using the unit immediately, and be sure to contact your dealer.
Rear panel
1
3
4
5
6
7
8
9
10
11 12
14
2
13
1 <SDI IN 1> to <SDI IN 32> terminals (connector: BNC
×
32/signal: SDI IN)
<SDI IN 25> to <SDI IN 32> terminals are equipped with color correctors.
The <SDI IN 27>/<SDI IN 28>/<SDI IN 31>/<SDI IN 32> terminals are equipped with up-converters.
2 <DVI-D IN1>/<DVI-D IN2> terminals (connector: DVI-D
×
2/signal: DVI-D IN)
Connects DVI-D output devices such as a computer using DVI-D cables.
f
The DVI-I connector cable cannot be used.
3 <SDI OUT 1> to <SDI OUT 16> terminals (connector: BNC
×
32/signal: SDI OUT)
Assigns SDI OUT signals from the <IN OUT> button on the top menu
→
[SDI OUT]
→
[Assign] tab. (2 distributions each)
<SDI OUT 13> to <SDI OUT 16> terminals are equipped with color correctors.
<SDI OUT 14>/<SDI OUT 16> terminals are equipped with down-converters.
4
<LAN> terminal (connector: RJ-45/signal: 100Base-TX)
Connects second and further Control Panels AV-HS60C1/AV-HS60C2/AV-HS60C4, menu operation computers, and external devices.
f
Images from the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 connected to this terminal cannot be displayed on the Menu Panel
AV-HS60C3.
