Operation (continued)
Setting a Standing Time
1
Some recipes call for a
standing time after cooking.
Press
Microwave
until the
desired power level appears
in the display. PL10 is the
highest and PL1 is the
lowest.
2
ヵㄊㄎㄆ
ヸㄆㄊㄈㄉㄕ
ヴㄕㄓㄕバヴㄆㄍㄆㄕ
ヴㄆㄏㄔㄐㄓチンㄆㄉㄆㄕ
Set cooking time by turning
dial (see previous page for
maximum times).
3
Press
Timer/Clock
once.
4
ヵㄊㄎㄆ
ヸㄆㄊㄈㄉㄕ
ヴㄕㄓㄕバヴㄆㄍㄆㄕ
ヴㄆㄏㄔㄐㄓチンㄆㄉㄆㄕ
Set desired standing time by
turning dial (up to 1 hour and
30 minutes).
5
ヴㄕㄓㄕバヴㄆㄍㄆㄕ
ヴㄆㄏㄔㄐㄓチンㄆㄉㄆㄕ
Press dial to
Start
. Cooking will
start. After cooking, standing
time will count down without
oven operating.
NOTES:
during Kitchen Timer,
Standing Time, Delay Start,
the time in the display
window will continue to
count down.
hour, it will count down in
units of minutes. If less than
one hour, the time will count
down in units of seconds.
display to denote hours.
When each stage finishes,
the oven will beep twice. At
the end of the program, the
oven will beep five times.
Standing Time, Delay Start
and Stage Cooking cannot
be used by Alexa control.
1.
7.
2. If the oven door is opened
3.
4.
Standing Time and
Delay Start can not be
programmed together
with auto programs
(such as Defrost, Sensor
Reheat, Auto/Sensor
Cook )and preheating. This
is
to prevent the starting
temperature of food from
rising before defrosting or
cooking begins. A change is
starting temperature could
cause inaccurate results.
When using Standing Time
or Delay Start, it is up to 2
power stages.
5. If the time exceeds one
6. An “H” will appear in the
バ
モㄖㄕㄐ チ
ヤㄐㄐㄌ
ヴㄆㄏㄔㄐㄓ
バ
モㄖㄕㄐ チ
ヤㄐㄐㄌ
ヴㄆㄏㄔㄐㄓ
20
