8
B R E A K E R
Z O O M /
F O C U S
S D I O U T
1
2
1
/
F
7 2 0
P R O G R E S S I V E
How to Install
_
How to set the lens
• Standard 2/3
q
bayonet type (B4 mount) lens of any makers can be used*.
1
Turn the lens fixing ring knob counterclockwise to remove the lens mount cap.
2
Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the
lens.
3
Connect the lens cable to the lens connector.
4
Connect the remote (zoom/focus control) cable to the zoom/focus connector on the
rear panel.
* Note that there are some lenses uncontrollable with respect to zoom, focus function.
Be sure to ask the dealer for the installation,
adjustment and connection of this equipment.
_
How to install on the camera housing, pan/tilt head, tripod, etc.
1
Precisely set the camera on the camera housing, pan/tilt head, tripod, etc. by using
the camera set-screw hole (1/4-20UNC, 3/8-16UNC).
2
When mounting the camera on a pan/tilt head, be sure to use proper tools and
make sure that there is no fear of falling off.
Remote (zoom/focus control) Cable
(When a pan/tilt head is used, connect
the cable to the pan/tilt head.)
Camera Cable
(To Lens Connector)
Lens Fixing Ring Knob
