- 10 -
HD SDI output connector [HD SDI OUT]
HD SDI signal output is given by this line.
G/L input connector [G/L IN]
For gen-lock with the camera, the external sync signal (black burst) or tri-level sync
signal is supplied to this input connector.
Operate indicator
Green LED lamp lights to indicate that the specified DC 12 V power is supplied to the
interface connector
.
Cooling fan
• Do not block or obstruct the ventilation during operation. It may otherwise cause
internal heating or fire.
• The life of this fan is approximately 0,000 hours (at room temp. 77 °F (25 °C)).
Replace the fan as needed.
(When the room temperature is higher than 95 °F (5 °C), replace the fan 0 %
earlier.)
Be sure to ask the dealer for the replacement.
Interface connector [I/F]
Pin No.
Signal
1
Gen-lock signal GND
2
Not used
Not used
TX_N (EIA22)/TXD (EIA22) output
5
RX_N (EIA22)/RXD (EIA22) input
6
DC power supply input (+12 V)
7
Gen-lock signal input
8
DC GND
9
TX_P (EIA22) output
10
RX_P (EIA22) input
11
GND
12
Not used
1
GND
1
GND
15
GND
When supplying DC power, supply the DC +12 V voltage to pin 6 and connect GND to
pin 8.
Major operating controls and their functions
