manualshive.com logo in svg

Panasonic AK-UB300G, Operating Instructions Manual

Share
Download
Panasonic AK-UB300G Operating Instructions Manual Download Page 75

– 75 –

Chapter 6 Web Screen — [Live] screen (single display mode)

2  [JPEG]

Displays JPEG images.

In the following cases, the selection status of the [Compression] button returns to the setting in [Stream] for [Initial display settings for "Live" page] in the 
[Video over IP] tab. (Windows)

 

f

When a screen has been exited to move to another

 

f

When a screen has been refreshed

[Stream] button

This button is displayed only when H.264 images are displayed. (Windows)
The display shows images as set in [H.264(1)]/[H.264(2)]/[H.264(3)]/[H.264(4)].
The characters on the selected button change to green.

1  [1]

The main area image is displayed as set in [H.264(1)]. (page 81)

2  [2]

The main area image is displayed as set in [H.264(2)]. (page 81)

3  [3]

The main area image is displayed as set in [H.264(3)]. (page 81)

4  [4]

The main area image is displayed as set in [H.264(4)]. (page 81)

In the following cases, the selection status of the [Stream] button returns to the setting in [Stream] for [Initial display settings for "Live" page] in the 
[Video over IP] tab. (Windows)

 

f

When a screen has been exited to move to another

 

f

When a screen has been refreshed

If the resolution of the selected H.264 image is set to [1920

×

1080] or [1280

×

720], the displayed image may be smaller than the actual size, depending 

on the screen size of your web browser.

[Image quality] button

This button is displayed only when JPEG images are displayed.
The display shows images as set in [Image quality(JPEG)].
The characters on the selected button change to green.

1  [1]

The display shows images as set in [Quality1] for [Image quality(JPEG)]. (page 80)

2  [2]

The display shows images as set in [Quality2] for [Image quality(JPEG)]. (page 80)

In the following cases, the selection status of the [Image quality] button returns to the setting in [Image quality(JPEG)] for [Initial display settings for 
"Live" page] in the [Video over IP] tab.

 

f

When a screen has been exited to move to another

 

f

When a screen has been refreshed

[Image capture size] button

This button is displayed only when JPEG images are displayed.
It switches the size of the image displayed in the main area.
The characters on the selected button change to green.

Summary of Contents for AK-UB300G















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands