Panasonic AK-UB300G, Operating Instructions Manual

Page: 58 / 110

– 58 –
Chapter 4 Menu Operations — Menu list
[SCENE FILE]
Item Description of settings
[MODE] Selects the operation mode.
[LOAD], [STORE]
f
Factory setting: [LOAD]
[FILE NO.] Selects a file number.
When [MODE] is [LOAD]: [OFF], [1] - [8]
When [MODE] is [STORE]: [1] - [8]
f
Factory setting: [OFF]
[FILE NAME] Enters a file name. (15 characters or less)
f
Factory setting: [SCENE1]
[EXECUTE] Selects whether to execute with the configured settings.
[NO], [YES]
[SYSTEM MODE]
[FORMAT] cannot be selected right after the power is turned ON, or when 59.94, 29.97, 23.98 and 50, 25 in [FORMAT] are switched since the unit is
starting up.
This is not an error. Perform operation after a while.
Item Description of settings
[FORMAT] Sets the system format.
[2160/59.94p], [2160/50p], [2160/29.97p], [2160/25p], [2160/23.98p], [1080/59.94p], [1080/59.94p
CROP], [1080/59.94i], [1080/50p], [1080/50p CROP], [1080/50i], [1080/29.97PsF], [1080/25PsF],
[1080/23.98p], [1080/23.98PsF], [720/59.94p], [720/50p]
f
Factory setting: [2160/59.94p]
[SHOOTING MODE] Sets the shooting mode.
[NORMAL], [HIGH SENS]
f
Factory setting: [NORMAL]
[SCAN REVERSE] Sets the scan method of the image output.
[OFF], [H], [V], [H + V]
f
Factory setting: [OFF]
[IN/OUT SELECT]
Item Description of settings
[HD-SDI 3G SDI] Sets the output format for HD SDI 3G output.
[LEVEL-A], [LEVEL-B]
f
Factory setting: [LEVEL-A]
[HD-SDI2 OUT ITEM] Sets the contents of the characters superimposed to the output image from the <HD SDI OUT 2> terminal.
[MENU ONLY]: Displays only on the menu.
[STATUS]: Displays all characters that are the same as displayed in the monitor.
f
Factory setting: [MENU ONLY]
[UHD-SDI OUT TYPE] Sets the output format of UHD.
[SQUARE], [2 SAMPLE INT]
f
Factory setting: [SQUARE]
[UHD-SDI 3G SDI] Sets the output format for HD SDI 3G output.
[LEVEL-A], [LEVEL-B]
f
Factory setting: [LEVEL-A]
[LAN CHAR] Sets if the character is superimposed to the output signal from the <LAN> terminal.
[OFF], [ON]
f
Factory setting: [OFF]
[UHD CROP] [HD-SDI2 OUT SEL] Sets the output image of the <HD SDI OUT 2> terminal during cropping.
[FULL], [CROP]
f
Factory setting: [FULL]
[CROP OUT SEL] Sets the crop output image during cropping.
[YL], [G], [MG]
f
Factory setting: [YL]
[CROP MARKER SEL] Sets the crop frame to display during cropping.
[YL], [G], [MG], [YL + G], [YL + MG], [G + MG], [YL + G + MG]
f
Factory setting: [YL + G + MG]
[CROP ADJ SEL] Sets the crop frame to adjust the position during cropping.
[YL], [G], [MG]
f
Factory setting: [YL]
[CROP H POSITION] Sets the horizontal position of crop during cropping.
[
−
50.00%] - [
+
50.00%]
(0.25% steps)
f
Factory setting: [0.00%]
[CROP V POSITION] Sets the vertical position of crop during cropping.
[ − 50.00%] - [ + 50.00%] (0.25% steps)
f
Factory setting: [0.00%]