Panasonic AK-SHB800G, Operating Manual, Page: 36 / 92

– 36 –
Chapter 3 Operation — Convenient shooting functions
Convenient shooting functions
Scan reverse shooting
Image can be displayed reversed vertically or horizontally by setting [MAIN MENU]
→
[SYSTEM MODE]
→
[SCAN REVERSE].
@ @ NOTE
t
When 1080 is selected in [MAIN MENU] → [SYSTEM MODE] → [PIXEL]
Scan reverse does not work on the CROP images from the 〈 SDI OUT1 〉 to 〈 SDI OUT4 〉 terminals.
Scan reverse works on the entire images from the 〈 HD SDI OUT1 〉 and 〈 HD SDI OUT2 〉 terminals. However, when a crop position has been set with
ROI control software, scan reverse does not work on the entire images from the 〈 HD SDI OUT1 〉 and 〈 HD SDI OUT2 〉 terminals.
Displaying the zebra pattern
The camera can display two types of zebra patterns.
The zebra pattern set by the menu is displayed by setting [MAIN MENU]
→
[DISPLAY SETUP]
→
[MARKER]
→
[ZEBRA]
→
[ON].
The level for zebra pattern display can be set in [MAIN MENU]
→
[DISPLAY SETUP]
→
[MARKER]
→
[ZEBRA].
Item Description of settings
[ZEBRA1 LEVEL] Sets the level of the luminance zebra 1.
[0%]…[109%]
f
Factory setting: [80%]
[ZEBRA2 LEVEL] Sets the level of the luminance zebra 2.
[0%]…[109%]
f
Factory setting: [100%]
[ZEBRA PATTERN] Sets the pattern of the luminance zebra.
[1], [1
+
2], [SPOT]
f
Factory setting: [1]
[SPOT]: The image level from the setting value of [ZEBRA1 LEVEL] to the setting value of [ZEBRA2 LEVEL] is displayed in the zebra pattern.
Image level
[ON] [OFF] [SPOT]
[109%]
[ZEBRA2 LEVEL]
[ZEBRA1 LEVEL]
[0%]
Displaying the center marker
Displays when set to [MAIN MENU] → [DISPLAY SETUP] → [MARKER] → [CENTER MARK] → [ON].
.