8 (E)
ENGLISH
Installation
Mounting the hood on the lens
Usually, when the lens is shipped from the factory, the hood
is put on the lens. If you remove the hood in some reason,
please attach it as instructed below.
1
Snap the hood on the front barrel of the lens.
2
Snap the hood on the front barrel of the lens, and shift
the mark on the front barrel of the lens 90 degrees from
the index mark on the hood.
Then, tighten the hood securely by turning the hood
lock knob clockwise.
Hood
Index mark
Lens barrel
Index mark
Hood lock knob
Be sure to keep the removed hood cap in a safe place
so as not to lose it.
Note
