26
Menu operations
Menu operations
The menu operation method, structure of the setting menu, and details of the setting menu are described.
Basic operations
[ MAIN MENU ]
MARKER
FUNCTION
VIDEO CONFIG
SYSTEM CONFIG
HOURS METER
TALLY BRIGHT
FOCUS ASSIST
[ MARKER ]
EXIT
MARKER
ZONE
4:3
BACK
CENTER
CROSS HATCH
SIZE
BOX MARKER
TYPE
H POS
V POS
H SIZE
V SIZE
OFF
4:3
OFF
NORMAL
OFF
OFF
80
OFF
BOX
640
360
460
460
<SELECT> dial button
<MENU> button
Fig. 1
Fig. 2
1
Press the <MENU> button.
[MAIN MENU] is displayed. (Fig. 1)
Previous menu is displayed by pressing the <MENU> button when [MAIN MENU]
→
[SYSTEM CONFIG]
→
[MENU RESUME]
→
[ON] is set.
[MAIN MENU] is displayed when the power is turned off once and then turned on again.
2
Turn the <SELECT> dial button and select the menu item.
3
Press the <SELECT> dial button.
The selected item is opened. (Fig. 2)
4
Turn the <SELECT> dial button and select the item to set.
5
Press the <SELECT> dial button.
The setting value changes to green.
6
Turn the <SELECT> dial button and change the setting.
To cancel, press the <MENU> button.
7
Press the <SELECT> dial button.
The setting is confirmed.
@
@
NOTE
t
This display disappears after approximately two minutes of inaction. The value displayed at that time will be confirmed as the setting value when the
display disappears.
