Panasonic AJSD930B - DVCPRO 50 DECK Operating Instructions Manual Download Page 49

Page: 49 / 81

49 (E)

CONTENTS

Setup menus

The underlined items indicates the initial setting.

USER menu

<VIDEO>

No./Item

Description

661

UMID GEN

This selects the basic UMID information to be
recorded on the tape when ON has been
selected as the setup menu item No. 660
(UMID REC) setting.

0000

INT :

Newly created basic UMID information of this
unit is always recorded.

0001

EXT :

The basic UMID information of the input
signals is recorded.
Newly created basic UMID information of this
unit is recorded if there is no basic UMID
information on the input signals.

<Note>

The source pack (of the UMID information) of the
input signal will be recorded on the tape,
regardless of this menu’s setting.

662

UMID POS

This sets the line on which the UMID
information is to be superimposed.

[625i system]

[525i system]

0000

BLANK

0000 BLANK

0001

12L

0010

17L

0006

17L

0015

22L

0008

19L

<Note>

The line selected for the setup menu item No.
501 (VITC POS-1) and No. 502 (VITC POS-2)
settings cannot be selected for this item.

SD955B

Summary of Contents for AJSD930B - DVCPRO 50 DECK


















































































Search results

Summary of Contents for AJSD930B - DVCPRO 50 DECK

Reviews:

Related manuals for AJSD930B - DVCPRO 50 DECK

Brands by name

Popular brands

Panasonic AJSD930B - DVCPRO 50 DECK, Operating Instructions Manual

Search results

Summary of Contents for AJSD930B - DVCPRO 50 DECK

Reviews:

Related manuals for AJSD930B - DVCPRO 50 DECK

Brands by name

Popular brands