Panasonic AJLT85P - DVC PRO Page 16 Operating Instructions Manual Download | Manualshive

Page: 16 / 76

background image

Description

This is exclusively designed for use in consumer-use cassette camera/recorder
units. It can be used with the laptop for playback only if the AJ-CS750P
cassette adaptor (option) is obtained.
If a consumer-use cassette tape is to be used, it must first be loaded into the
AJ-CS750P adaptor (optional accessory).
Use of Panasonic consumer DV cassette tapes is recommended.
Ensure that inserting such a tape directly without using the cassette adaptor
may cause trouble.

Recording/playback tape with a maximum length of 66 minutes
(AJ-P12MP, AJ-P24MP, AJ-P33MP, AJ-P46MP, AJ-P66MP)

Recording/playback tape with a maximum length of 126 minutes
(AJ-P34LP, AJ-P66LP, AJ-P94LP, AJ-P126LP)

Cassette type

Consumer-use DV cassette
(S cassette)

M cassette

L cassette

Align the cassette tape with the center of the loading slot, and push it in gently. It is then loaded automatically.

COMPATIBLE TAPES

16

<Precautions for playing back consumer-use DV tapes/DVCAM tapes>
• Consumer-use tapes can be used for playback only.
• Use tapes specially designed for DVCPRO applications with this unit. However, if DV tapes or DVCAM tapes are to be used in

the playback mode, it is recommended that playback be limited to as short a period of time as possible.

• Tapes recorded in the LP mode cannot be played back.
• Since consumer-use tapes cannot be used for recording, the laptop’s functions related to recording as well as its REC and

other operations are disabled.

• Consumer tape FF/REW speed is VTR limited to ±32X. Slow motion playback is not possible with consumer cassette tape.
• In order to protect the tape, the maximum STILL TIMER for consumer tape is 10 seconds, and the available time for leaving

the tape in STILL mode is set at 1 minute.

• The read disable display for the time code may sometimes appear while consumer-use tape is being used in the search, slow

motion or still mode.

M cassette

DV tape

(S cassette)

Casette adaptor
(AJ-CS750P, option)

L cassette

VTR 1

VTR 2

«
...
14
15
16
17
18
...
»

Summary of Contents for AJLT85P - DVC PRO













































































Reviews:

No comments

Related manuals for AJLT85P - DVC PRO

ACS880-01 Series

Brand: ABB Pages: 238

Brand: KaVo Pages: 16

Brand: Taurus Pages: 28

Brand: Kärcher Pages: 54

Brand: ABB Pages: 85

Brand: FEAS Pages: 72

Brand: Facnor Pages: 33

Brand: Idmed Pages: 2

Brand: JBL Pages: 38

Brand: JBSYSTEMS Light Pages: 32

Brand: JBM Pages: 12

TRAKTOR KONTROL S4

Brand: Native Instruments Pages: 86

Brand: Native Instruments Pages: 245

Brand: PAT Pages: 44

Brand: Park Tool Pages: 4

Brand: Qlight Pages: 4

Brand: Tascam Pages: 3

i-limb access hand

Brand: Össur Pages: 246

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands