DIS-3
7. Removal of SUB1 Board
1. Disconnect CN101 on SUB1 Board.
2. Unscrew 2 screws (G) so that the SUB 1 Board can
be removed.
8. Removal of SUB2 Board
1. Unscrew hex screw fixing all front knobs.
(PEAKING, CONTRAST and BRIGHT knob)
2. Unscrew hex nut (A) and then pull out the each
front knob so that the SUB 2 board can be
removed.
9. Removal of MAIN Board
1. Disconnect CN1 on MAIN Board so that the EVF
cable can be removed.
2. Unscrew 4 screws (H) so that the MAIN Board can
be removed.
10. Removal of Guard Bar
1. Unscrew 2 screws (I) so that the Guard bar can be
removed.
CN101
Hex nut (A)
SCREWS (I)
SCREWS (G)
SCREWS (H)
SCREWS (H)
