manualshive.com logo in svg

Panasonic AJHPX2700G - MEMORY CARD CAMERA-RECORDER, Operating Instructions Manual

The Panasonic AJHPX2700G Memory Card Camera-Recorder is an exceptional device for capturing high-quality footage. To get the most out of this professional-grade camera, you can easily download the operating instructions manual for free from our website. Explore the comprehensive manual to unlock the camera's full potential and enhance your shooting experience.

Share
Download
background image

44

Recording and Playback: Normal and Variable Speed Playback

The PLAY/PAUSE button provides monochrome playback 
through the viewfinder and color playback on the LCD 
monitor. A color video monitor connected to the HD SDI A · 
B or MON OUT connector of unit also provides color 
playback.
The HD SDI A · B connector outputs an SDI playback (to 
view the playback, the HD SDI A · B switch on the side panel 
must be positioned to [MEM]).

The FF and REW buttons provide 32  and 4  fast 
playbacks and fast reverse playbacks.
When playback is paused, the FF button locates the 
beginning of the next clip while maintaining the pause mode.
When playback is paused, the REW button locates the 
beginning of the current clip while maintaining the pause 
mode.

Notes

When a clip with a different SYSTEM MODE cannot be 
played back, change the SYSTEM MODE setting of this 
unit to match the format of the clip. For more details about 
the SYSTEM MODE, refer to [Recording formats and 
output connector signal formats] (page 47).
When a P2 card has been just removed or inserted, or 
when the power has been just turned on for playback, it 
may take some time for unit to read clip information. If this 
is the case, the viewfinder displays “UPDATING”. If data is 
played back when the P2 card is being recognized, the 
message “CANNOT PLAY” will be displayed.
If a P2 card is inserted while another P2 card is being 
played back, the clips on the inserted P2 card will not be 
played back. A P2 card inserted during playback will be 
recognized after playback ends.
If you perform variable speed playback on a clip split 
across more than one P2 card, sound may disappear for a 
moment. This is not a fault.

Text memos are time-coded thumbnails added to any video 
point when a clip is being recorded or played back.
The TEXT MEMO button adds text memo information at the 
appropriate point. You can edit added text memos using the 
P2 Viewer.
Through a thumbnail display, you can choose and play back 
the text memo point or copy any portion. For more 
information, see [Text Memo] (page 126).

a.

TEXT MEMO button

Notes

One clip can have up to 100 text memos.
Text memos can also be recorded when the LCD monitor 
is in thumbnail mode. In this case, the text memo is added 
to the position on the clip where the cursor is set (normally 
at the beginning) only.
Text memos cannot be recorded when the color bar is 
output or the unit is in LOOP REC mode and INTERVAL 
REC mode.

Normal and Variable Speed Playback

Variable speed playback

Text Memo Function

a

AJ-HPX2700G-VQT1V27_eng.book  44 ページ  ２００８年９月２日　火曜日　午後５時４３分

Summary of Contents for AJHPX2700G - MEMORY CARD CAMERA-RECORDER















































































































































































































Reviews:

No comments

Related manuals for AJHPX2700G - MEMORY CARD CAMERA-RECORDER

Ken A Vision Vision Viewer 7890UM Specifications preview
Vision Viewer 7890UM
Brand: Ken A Vision Pages: 2
TP-Link TL-SC2020N Quick Installation Manual preview
TL-SC2020N
Brand: TP-Link Pages: 2
Panasonic Palmcorder PV-L552 Operating Manual preview
Palmcorder PV-L552
Brand: Panasonic Pages: 42
Panasonic Palmcorder PV-L557 User Manual preview
Palmcorder PV-L557
Brand: Panasonic Pages: 48
Panasonic Palmcorder PV-L51 User Manual preview
Palmcorder PV-L51
Brand: Panasonic Pages: 44
Panasonic Palmcorder PV-L590 User Manual preview
Palmcorder PV-L590
Brand: Panasonic Pages: 56
Panasonic Palmcorder PV-L353 Operating Instructions Manual preview
Palmcorder PV-L353
Brand: Panasonic Pages: 44
Panasonic Palmcorder PV-L352 Operating Instructions Manual preview
Palmcorder PV-L352
Brand: Panasonic Pages: 44
Panasonic Palmcorder PV-L560 User Manual preview
Palmcorder PV-L560
Brand: Panasonic Pages: 56
Panasonic Palmcorder PV-L352 Operating Manual preview
Palmcorder PV-L352
Brand: Panasonic Pages: 44
Panasonic Palmcorder PV-L50 User Manual preview
Palmcorder PV-L50
Brand: Panasonic Pages: 60
Panasonic Palmcorder PV-GS90P Service Manual preview
Palmcorder PV-GS90P
Brand: Panasonic Pages: 59
Panasonic Palmcorder PV-GS90P Operating Instructions Manual preview
Palmcorder PV-GS90P
Brand: Panasonic Pages: 60
Panasonic Palmcorder PV-L552H Operating Instructions Manual preview
Palmcorder PV-L552H
Brand: Panasonic Pages: 84
Panasonic Palmcorder PV-L552 Operating Instructions Manual preview
Palmcorder PV-L552
Brand: Panasonic Pages: 84
Panasonic Palmcorder PV-L354-K Operating Instructions Manual preview
Palmcorder PV-L354-K
Brand: Panasonic Pages: 80
Panasonic Palmcorder PV-D526 User Manual preview
Palmcorder PV-D526
Brand: Panasonic Pages: 52
Panasonic Palmcorder PV-L352-K Operating Instructions Manual preview
Palmcorder PV-L352-K
Brand: Panasonic Pages: 80

Brands by name

Popular brands

Load more brands