204
Specifications
GENLOCK IN:
BNC 1, 1.0 V
P
-
P
, 75
Ω
(This is available as the return video input connector.)
MON OUT:
BNC 1
(It can be switched among HD SDI/VBS.)
HD SDI:
0.8 V
P
-
P
, 75
Ω
(Compliant with the SMPTE292M/
296M standards)
VBS:
1.0 V
P
-
P
, 75
Ω
HD SDI A:
BNC 1, 0.8 V
P
-
P
, 75
Ω
(Compliant with the SMPTE292M/296M standards)
HD SDI B:
BNC 1, 0.8 V
P
-
P
, 75
Ω
(Compliant with the SMPTE292M/296M standards)
TC IN:
BNC 1, 0.5 V
P
-
P
to 8 V
P
-
P
, 10 k
Ω
TC OUT:
BNC 1, low impedance, 2.0±0.5 V
P
-
P
DVCPRO:
6 pins (output)
Transmission rate:
400 Mbps, 200 Mbps, or 100 Mbps
(selectable)
Transmission data:
Compliant with IEEE1394-1995/
1394a-2000, IEC61883-1 and 2, and
SMPTE 396M
Control commands:
Compliant with the AV/C Command
Set standards.
AUDIO IN CH1/CH2:
XLR 2, 3 pins
LINE, MIC, and +48 V switch-selectable
LINE: +4 dBu
(–3 dBu/0 dBu/+4 dBu selectable
with menu)
MIC: –60 dBu
(–60 dBu/–50 dBu
selectable with menu)
MIC +48 V:
Compatible with +48 V phantom
power supply
–60 dBu (–60 dBu/–50 dBu
selectable with menu)
MIC IN:
XLR 1, 5 pins
+48 V phantom (on/off selectable with menu)
–40 dBu (–50 dBu/–40 dBu selectable with menu)
WIRELESS IN:
25 pin, D-SUB, –40 dBu
Dual Channel supported
AUDIO OUT CH1/CH2:
XLR 1, 5 pins, +4 dBu
(–3 dBu/0 dBu/+4 dBu selectable with menu)
Balanced low-impedance output
Headphones:
Stereo mini jack 2
DC IN:
XLR 1, 4 pins, DC 12 V (DC 11 V to 17 V)
DC OUT:
4 pins, DC 12 V (DC 11 V to 17 V)
Maximum rated current: 1.5 A
LENS:
12 pins
EVF:
20 pins
REMOTE:
10 pins (connector for AJ-RC10G)
GPS:
6 pins (connector for AJ-GPS910G)
USB 2.0 (HOST):
Type-A connector, 4-pin, in accordance with USB
Ver. 2.0
USB 2.0 (DEVICE):
Type-B connector, 4-pin, in accordance with USB
Ver. 2.0
Shoulder Strap
Front Audio Level control knob
Control knob mounting screw 1
CD-ROM
Weight and dimensions when shown are approximately.
Specifications are subject to change without notice.
Input/output Unit
Accessories
AJ-HPX2700G-VQT1V27_eng.book 204 ページ ２００８年９月２日 火曜日 午後５時４３分
