manualshive.com logo in svg

Panasonic AJHD1700 - HD VTR W/24P, Operating Instructions Manual

The Panasonic AJHD1700 - HD VTR W/24P is a professional-grade High Definition video tape recorder. Unlocking its full potential is easy with the Operating Instructions Manual available for free download at manualshive.com. This comprehensive manual provides step-by-step guidance, ensuring users can optimize their experience with this top-of-the-line VTR.

Share
Download
background image

121

Error messages

Display

• Description
• VTR operation and remedial action

T REEL
TORQUE ERR

If an abnormal torque applied to the take-up reel motor
is  detected,  the  AUTO  OFF  lamp  lights,  and  the
message display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

S REEL
TORQUE ERR

If an abnormal torque applied to the supply reel motor
is  detected  or  if  an  abnormal  current  flowing  to  the
current-sensing  resistor  is  detected,  the  AUTO  OFF
lamp lights, and the message display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

If the error message display persists even after the
VTR  has  been  shut  down  and  started  up  again,
consult your dealer.

UNLOAD
ERROR

If the tape has not been wound up during unloading,
the AUTO OFF lamp lights, and the message display
blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

WINDUP
ERROR

If, after the total tape amount has been detected, the
amount of tape wound up onto the take-up reel and the
amount of tape supplied by the supply reel differ to an
abnormal extent while the tape is traveling, the AUTO
OFF lamp lights, and the message display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

W-UP REEL
NOT ROTA

If, after the cassette has been inserted, the tape take-
up reel has not wound up the tape while the total tape
amount is not detected and while the tape is traveling,
the AUTO OFF lamp lights, and the message display
blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

Error messages

S-FF/REW
TIMEOVER

When the tape start or end processing operation is not
completed,  the  AUTO  OFF  lamp  lights,  and  the
message display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

T REEL ROTA
TOO FAST

If the take-up reel motor rotates at an abnormally fast
rate,  the  AUTO  OFF  lamp  lights,  and  the  message
display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

S REEL ROTA
TOO FAST

If the supply reel motor rotates at an abnormally fast
rate,  the  AUTO  OFF  lamp  lights,  and  the  message
display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

Display

• Description
• VTR operation and remedial action

FRONT LOAD
MOTOR

If the cassette fails to move up even after 6 seconds
have elapsed since the VTR transferred to the EJECT
mode, the AUTO OFF lamp lights, and the message
display blinks.
<Note>
If the cassette fails to move down even after 6 seconds
have elapsed since the cassette was inserted, the VTR
transfers to the EJECT mode.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

LOADING
MOTOR

If the unloading operation fails to be completed within 6
seconds, the AUTO OFF lamp lights, and the message
display blinks.
<Note>  
If the loading operation fails to be completed within 6
seconds,  the  VTR  transfers  to  the  EJECT  mode
(unloading mode).
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

REEL DIR
UNMATCH

If  the  take-up  reel  motor  is  running  in  the  reverse
direction, the AUTO OFF lamp lights, and the message
display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

REEL
TENSION
ERROR

If an abnormal tension at the supply side is detected in
the  reel  mode,  the  AUTO  OFF  lamp  lights,  and  the
message display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

SERVO COMM
ERROR

When  the  servo  microcomputer  does  not  follow  the
instructions of the system control microcomputer even
after 10 seconds have elapsed, the AUTO OFF lamp
lights, and the message display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

SERVO
CONTROL
ERROR

When  there  is  no  response  from  the  servo
microcomputer for 1 or more seconds, the AUTO OFF
lamp lights, and the message display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

SERVO
ERROR

When only the servo microcomputer was reset in an
instantaneous power failure, etc., the AUTO OFF lamp
lights, and the message display blinks.
VTR: Stops.
• Set the POWER switch to OFF and then back to ON

again.

Summary of Contents for AJHD1700 - HD VTR W/24P







































































































































Reviews:

No comments

Related manuals for AJHD1700 - HD VTR W/24P

Night Owl HDA30 series Quick Setup Manual preview
HDA30 series
Brand: Night Owl Pages: 9
ucorder IRDC150 User Manual preview
IRDC150
Brand: ucorder Pages: 2
COP-USA SL-DVR User Manual preview
SL-DVR
Brand: COP-USA Pages: 22
Panasonic AWF575 - COLOR CAMERA Specification Sheet preview
AWF575 - COLOR CAMERA
Brand: Panasonic Pages: 2
Panasonic AWE600 - COLOR CAMERA Brochure & Specs preview
AWE600 - COLOR CAMERA
Brand: Panasonic Pages: 8
Panasonic AVCHD AG-AC7 Brochure & Specs preview
AVCHD AG-AC7
Brand: Panasonic Pages: 4
Panasonic AWE800 - COLOR CAMERA Operating Instructions Manual preview
AWE800 - COLOR CAMERA
Brand: Panasonic Pages: 56
Panasonic AWE600 - COLOR CAMERA Operating Instructions Manual preview
AWE600 - COLOR CAMERA
Brand: Panasonic Pages: 56
Panasonic Digital Palmcoder Multicam PV-DC152 Operating Instructions Manual preview
Digital Palmcoder Multicam PV-DC152
Brand: Panasonic Pages: 73
Panasonic Digital Palmcoder PV-DV851 Operating Manual preview
Digital Palmcoder PV-DV851
Brand: Panasonic Pages: 72
Panasonic AW-F575E Operating Instructions Manual preview
AW-F575E
Brand: Panasonic Pages: 38
Panasonic AWE560 - COLOR VIDEO CAMERA Operating Instructions Manual preview
AWE560 - COLOR VIDEO CAMERA
Brand: Panasonic Pages: 64
Panasonic AW-HE2E Operating Instructions Manual preview
AW-HE2E
Brand: Panasonic Pages: 57
Panasonic AWE350P - COLOR CAMERA Operating Instructions Manual preview
AWE350P - COLOR CAMERA
Brand: Panasonic Pages: 72
Panasonic AVCCAM AG-HMC81E Operating Instructions Manual preview
AVCCAM AG-HMC81E
Brand: Panasonic Pages: 52
Panasonic BB-HNP11A Operating Instructions Manual preview
BB-HNP11A
Brand: Panasonic Pages: 100
Panasonic AWF575 - COLOR CAMERA Operating Instructions Manual preview
AWF575 - COLOR CAMERA
Brand: Panasonic Pages: 100
Panasonic aw-e650p Operating Instruction preview
aw-e650p
Brand: Panasonic Pages: 84

Brands by name

Popular brands

Load more brands