Panasonic AJ-UPX360ED, Operating Instructions Manual

Page: 83 / 216

– 83 –
Chapter 4 Operation — Menu settings
If [AUDIO CH2 LEVEL] is assigned to the USER button, pressing the USER button switches [AUTO]/[MANUAL].
The items that can be set are as follows.
f [AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH3 LEVEL]
Sets if the recording level adjustment method for audio channel 3 is to be automatic or manual.
The items that can be set are as follows.
f [AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH4 LEVEL]
Sets if the recording level adjustment method for audio channel 4 is to be automatic or manual.
The items that can be set are as follows.
f [AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH3 LEVEL CONTROL]
The recording level can be manually adjusted when [CH3 LEVEL] adjusting the recording level of the audio channel 3 is set to [MANUAL].
The items that can be set are as follows.
f [0]…[100]
(Factory setting: [70])
[CH4 LEVEL CONTROL]
The recording level can be manually adjusted when [CH4 LEVEL] adjusting the recording level of the audio channel 4 is set to [MANUAL].
The items that can be set are as follows.
f [0]…[100]
(Factory setting: [70])
[CH1 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 1.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH2 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 2.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH3 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 3.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH4 MIC LOWCUT]
Enables/disables the lowcut filter for audio channel 4.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH1 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 1 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH2 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 2 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[CH3 LIMITER]
Enables/disables the limiter when the method to adjust the audio input level for audio channel 3 is manual.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])