Panasonic AJ-UPX360ED Operating Instructions Manual Download Page 6

Page: 6 / 216

Read this first!

– 6 –

Batteries that may be used with this product (as of April 2020)

Panasonic AG-VBR59 / AG-VBR89 / AG-VBR118 / VW-VBD58 batteries may be used with this product.

It has been found that counterfeit battery packs which look very similar to the genuine product are made

available to purchase in some markets. Some of these battery packs are not adequately protected with internal

protection to meet the requirements of appropriate safety standards. There is a possibility that these battery

packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring

as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that

a genuine Panasonic battery pack is used.

Battery Charger / AC Adaptor

Disconnect the AC mains plug from the AC mains socket when not in use.

Information on Disposal in other Countries outside the European Union

These symbols are only valid in the European Union. If you wish to discard these items, please contact your

local authorities or dealer and ask for the correct method of disposal.

The symbols on this product (including the accessories) represent the following:

Standby (OFF)

Class II equipment (The construction of the product is double-insulated.)

Summary of Contents for AJ-UPX360ED

























































































































































































































Search results

Summary of Contents for AJ-UPX360ED

Reviews:

Related manuals for AJ-UPX360ED

Brands by name

Popular brands

Panasonic AJ-UPX360ED, Operating Instructions Manual

Search results

Summary of Contents for AJ-UPX360ED

Reviews:

Related manuals for AJ-UPX360ED

Brands by name

Popular brands