102
8-2-5 OUTPUT SEL
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
VOICE MEMO
RESERV
ON
OFF
Set the available memory space for voice
memos in P2 cards.
ON:
Reserve a voice memo area of 10
minutes or longer separately from the
video recording capacity. The voice
memo area can be used even when
FULL is displayed for the recording
capacity of the P2 card.
OFF:
Do not reserve any voice memo
space.
<Note>
Even when this item is set to OFF, and FULL
is displayed for the P2 card’s recording
capacity, it may be possible to record voice
memos depending on the status of the P2
card.
– C U F –
REC START
ALL
NORMAL
Select operating modes that allow recording
to start.
ALL:
Allow recording to start during stop,
recording pause, and playback.
NORMAL:
Allow recording to start during stop and
recording pause.
<Note>
When the INTERVAL REC MODE is set to
either “ON” or “ONE SHOT”, the “ALL”
setting for this option switches to “NORMAL”
operation.
– C U F –
P.ON REC
SLOT SEL
HOLD
SLOT1
Select the recording order of the slot when
the power is turned on.
HOLD:
The recording order starts with the card
previously selected when the power was
turned off.
SLOT1:
The recording order starts with the card
that is inserted in Slot 1 when the power
is turned on.
– C U F –
Items/
Data Saved
Adjustable
Range
Remarks
VIDEO OUT
SEL
VBS
VF
Y
SDI
Select the output signal on the VIDEO OUT
terminal.
VBS:
Output a regular composite signal.
VF:
Output a VF Y signal. The status
display is also superimposed.
Y:
Output a component Y signal.
SDI:
Output an SDI signal. Only selectable
when the optional AJ-YA902AG
extension board is attached.
– C U F –
OUTPUT CHAR TC
STATUS
MENU
ONLY
Set the character contents superimposed
onto the output signals for the VIDEO OUT
terminal (Analog or SDI) and MON OUT
terminal.
TC:
Display the time code. (Displays the
menu when menu characters are
superimposed.)
<Note>
The TC display position moves up and down
depending on the camera ID position.
STATUS
:
Display the same characters
superimposed on the VF signal. (Displays
the menu when menu characters are
superimposed.)
MENU ONLY:
Displays only when the menu characters
are superimposed. No display appears
when other characters are superimposed.
– C U F –
MONITOR OUT
CHAR
ON
OFF
Select whether or not to superimpose
characters on the MON OUT terminal signal
independently of the camera’s VIDEO OUT
CHARACTER switch. (The character
content is the same as the video output
signal.)
ON:
Enable superimpose.
OFF:
Disable superimpose.
– C U F –
LCD MON
CHAR
ON
OFF
Select whether or not to superimpose
characters on the LCD monitor. (The
character content is the same as the video
output signal.)
ON:
Enable superimpose.
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
OFF:
Disable superimpose.
(Not interlocked with the VIDEO OUT
CHARACTER switch.)
– C U F –
VF MODE
EE/PB
EE
Select the image to display in the viewfinder.
EE/PB:
Display the playback image in the
playback mode.
EE:
Always display the camera image.
– C U F –
THUMBNAIL
OUT
ON
OFF
Select whether or not to output clip
thumbnails displayed on the LCD monitor to
the video output and monitor output signals.
ON:
Enable output.
OFF:
Disable output.
– C U F –
#,52:''PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧟㧞ᣣޓ᳓ᦐᣣޓඦᓟ㧡ᤨ㧞㧜ಽ
