11
2
Chapter 2 Parts and their Functions
2-1 Power Supply and Accessory Mounting Section
POWER switch
Used to turn on/off the power.
Battery mount
A battery pack from Anton/Bauer is mounted here.
DC IN (external power input) socket (XLR, 4P)
To operate your AJ-SPC700P on AC power, the AC
adaptor AJ-B75 (optional accessory) must be connected
to this socket.
BREAKER switch
When an excessive amount of current is fed through the
video camera-recorder, due to any abnormal event, the
breaker automatically turns off the power in order to
protect the device.
After the interior of the video camera-recorder has been
checked and/or repaired, this button must be depressed.
If there is no unusual reaction, the unit can be powered-
up.
Cable Clamp
This clamp secures cables for a video light and other
accessories.
Shoulder strap fittings
The shoulder strap is attached here.
Light shoe
A video light or similar accessory can be attached here.
Lens mount (bayonet type)
The lens is attached here.
Lens lever
Lower this lever to lock the lens to the lens mount.
Lens mount cap
To remove the cap, raise the
lens lever.
When the lens is not mounted, replace the cap.
Lens cable/microphone cable clamp
This clamp secures the lens and microphone cables.
Tripod mount
When you want to mount the AJ-SPC700P on a tripod,
the optional tripod adapter (SHAN-TM700) is attached
here.
LENS jack (12-pin)
The lens connection cord is connected here. For a
detailed description of your lens, see the relevant
manufacturer’s instruction manual.
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ
