49
4
Chapter 4 Adjustments and Settings for Recording
(continued)
Information Item
Indication
Status
PRE RECORDING
indication/
SD memory card
remaining free space
(when MODE CHECK
is being performed)
P-REC (blink)
__
h
__
m
Indicated while pre-recorded video and audio are being recorded on the P2
card. If the USER switch is set to perform the PRE REC function, either “P-
REC OFF” or the specified duration “1s - 8/15s” is displayed when the PRE
RECORDING mode is switched by pressing the USER switch.
If a video encoder card (AJ-YAX800G, optional accessory) is attached, the
remaining free space on the SD Memory card will be displayed when the
MODE CHECK button is pressed during proxy recording.
ID record indication
ID
The ID is set to be superimposed on the video from the camera.
Battery type
PRO14 - AC_ADPT
Battery type, selected through a menu option. When the AC adapter is
connected, it is indicated as AC_ADPT.
Battery remaining
level/voltage
__
.
_
V
___
%
EMP
MAX
Battery remaining level in tenths of a volt
Digital battery remaining level, as a percentage
Digital battery empty.
Digital battery fully charged.
Camera-recorder
REC indication
REC
The indication stays illuminated during recording. This is displayed when the
menu option REC TALLY of the SYSTEM MODE is set to “CHAR”.
This can also be displayed during the recording using the AJ-SPC700P alone.
This is displayed when the menu option REC STATUS of the VF INDICATOR2
is set to “ON”.
P2 card remaining
free space
___
min
END
WP
LOOP
INFO P2
_
/
_
The indication “
___
min” stays illuminated under normal conditions or blinks
when the remaining level is near zero.
When the card space is used up, “END” comes on.
The P2 card is write-protected.
The camera-recorder is in LOOP REC mode. When loop recording cannot be
performed, for example because the P2 card has no free space, the indication
blinks.
P2 card being recognised.
Total free space/capacities of the P2 cards (when MODE CHECK is being
performed).
<Note>
When the menu option P2 CARD REMAIN is set to “ONE CARD”, the number
of the P2 card slot that contains the target card is indicated, together with the
remaining space.
For more information, see [P2 Card Remaining Free Space/capacity
Indication] (page 50).
P2 card remaining
free space (when
MODE CHECK is
being performed)
___
min
The number of the P2 card slot that contains the target card and the
remaining free space (when MODE CHECK is being performed) are
indicated. In LOOP REC mode, the minimum guaranteed recording time is
indicated. This indication also appears when the target P2 card has been
switched with a user button.
The minimum guaranteed recording time refers to the sum, at the time loop
recording is stopped, of the remaining free space of available P2 cards,
except for the card with the largest remaining free space.
Example:
If three P2 cards are available, with remaining space of eight
minutes, five minutes and two minutes respectively, then the
minimum guaranteed recording time is seven minutes.
Super iris ON/super
black ON
S
B
SB
Super iris ON.
Super black ON.
Super iris and super black both ON.
Color temperature
_
.
_
K
Color temperature assigned to A, B, and PRE of the WHITE BAL switch (this
is a value stored at AWB performance or a value set through the menu
option). The indication is not provided in ATW mode.
Shutter speed/mode
1/
__
.
_
1/100 - 1/2000
SUPER V
Shutter speed set to SYNCHRO SCAN.
Shutter speed fixed.
Shutter speed set to SUPER V (high vertical resolution mode).
[SD]
[1]
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ
