Panasonic AJ-SD255 - Professional Editing Video Cassete recorder/player Operating Instructions Manual Download

Page: 28 / 46

Setup menus (continued)

The underlined items indicates the initial setting.

USER menu <VIDEO>

No./Item

Description

600

INT SG

This selects the internal reference
signal.

0001

BB :

The black burst is generated.

0002

CB100 :

100% color bars are generated.

0003

CB75 :

75% color bars are generated.

602

V-MUTE
SEL

This selects whether to mute the video
output signals when a blank on the
tape has been detected during
playback.

0000 N-MUTE :

No muting. (Freeze)

0001 LOW RF :

Muting. (Set to gray.)

603

CC (F1)
BLANK

(For AJ-SD255P)

This selects ON or OFF for the closed
caption signal of the first field.

0000 BLANK :

Signal is forcibly blanked.

0001

THRU :

Signal is not blanked.

604

CC (F2)
BLANK

(For AJ-SD255P)

This selects ON or OFF for the closed
caption signal of the second field.

0000 BLANK :

Signal is forcibly blanked.

0001

THRU :

Signal is not blanked.

605

FREEZE SEL

This selects the freeze mode for still
pictures.

0000

FIELD :

Field freeze.

0001 FRAME :

Frame freeze.

Note:

When frame freeze has been selected,
the frame slow status is established with
the slow setting.

609

EDH

This selects whether to superimpose
EDH onto the SDI output signals.

0000 OFF :

EDH is not superimposed.

0001

ON :

EDH is superimposed.

610

IN LV

(For AJ-SD255P)

This selects the analog component
input level.

0000

M :

M level

0001 B-CAM :

ß-CAM level

614

OUT

(For AJ-SD255P)

This selects the analog component
output level.

0000

M :

M level

0001 B-CAM :

ß-CAM level

No./Item

Description

622

SETUP

(For AJ-SD255P)

For setting 7.5% setup processing to
be performed on input and output
signals.

When the STOP button is pressed,
operation is transferred to the sub-screen,
and the setup level is set for each output.
To return from the sub-screen, press the
STOP button again.

CMPST IN

This selects the 7.5% setup processing for
the input composite and S-Video signal.

0000 THRU :

The signal is recorded in its original
form.

0001

CUT :

The signal is recorded with the 7.5%
setup removed.

CMPST OUT

This selects the 7.5% setup processing for
the input composite and S-Video signal.

0000 THRU :

The signal is output in its original form.

0001

ADD :

The signal is output with the 7.5%
setup added.

Note:

Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 622 (SETUP).

CMPNT IN

This selects the 7.5% setup processing
for the input component signal.

0000

THRU :

The signal is recorded in its original
form.

0001

CUT :

The signal is recorded with the 7.5%
setup removed.

CMPNT OUT

This selects the 7.5% setup
processing for the output composite,
component and serial (digital) signal.

0000

THRU :

The signal is output in its original form.

0001

CUT :

The signal is output with the 7.5%
setup removed.

0002

ADD :

The signal is output with the 7.5%
setup added.

Sub-screen

YA94G

This appears only when the optional board
AJ-YA94G has been installed.

Summary of Contents for AJ-SD255 - Professional Editing Video Cassete recorder/player















































Search results

Summary of Contents for AJ-SD255 - Professional Editing Video Cassete recorder/player

Reviews:

Related manuals for AJ-SD255 - Professional Editing Video Cassete recorder/player

Brands by name

Popular brands

Panasonic AJ-SD255 - Professional Editing Video Cassete recorder/player, Operating Instructions Manual

Search results

Summary of Contents for AJ-SD255 - Professional Editing Video Cassete recorder/player

Reviews:

Related manuals for AJ-SD255 - Professional Editing Video Cassete recorder/player

Brands by name

Popular brands