Panasonic AJ-SD255 - Professional Editing Video Cassete recorder/player, Operating Instructions Manual

Page: 17 / 46

17
Setup (initial settings)
The unit’s main settings are performed while making selections using a menu-driven system.
When a TV monitor is connected to the VIDEO MON connector on the unit’s rear panel, the setup menus will appear on the TV
monitor.
Digital Video Cassette Recorder AJ-
SUPER
ON
OFF
TCG
REGEN
PRESET
EXT
INT
COUNTER
PF PF1 PF2 PF3 DIAG
MENU
PUSH
SHTL/SLOW
TC
PRESET
METER
FULL/FINE
MONITOR SEL
RESET UNITY VAR
INPUT SELECT
VIDEO AUDIO
HEADPHONES
SEARCH
EJECT
POWER
REC INHIBIT CONTROL
ON
ON
OFF
OFF
LOCAL REMOTE
REC PLAY
FF REW STOP
CH 1 CH 2 CH 1 CH 2
REC PB
(1) (5)
(2) (3)
Changing the settings
(1) Press the MENU button.
The setup menu screen appears on the TV monitor, and
the setup menu item number appears on the counter
display.
When the FF button is pressed for about 1.5 seconds, the
name of the setup menu item is displayed on the counter
display. When the same button is pressed again for about
1.5 seconds, the original item No. display is restored.
(If a setup was performed previously, the screen on
which the last change was made is displayed.)
(2) Incline the joystick upward or downward to
select the item to be set.
The cursor ( ) on the menu screen moves, and the item
number on the display flashes.
• When the FF or REW button is pressed while holding
down the PLAY button, what is on the display is
replaced with the next or previous major item.
(3) Incline the joystick to the left or right at the
position where the change is to be made.
The setting is now changed.
To return what has been established as the setting to the
factory setting, press the RESET button while holding
down the SEARCH button.
(4) If there is another item to be changed, repeat
steps (2) to (3).
(5) Press the MENU button.
• If none of the settings have been changed, the menu
screen display is cleared.
• If a setting has been changed, a confirmation screen
appears.
• To activate the change in the setting, press the PLAY
button.
• To cancel the change in the setting, press the STOP
button.
• To return what has been established as the setting to
the factory setting, press the RESET button while the
menu is displayed. A confirmation screen now appears,
and if the PLAY button is pressed in this status, the
factory setting is restored.
Notes:
• If the RESET button is pressed to restore the factory
settings, only the user files currently in use are
restored. The other user files remain unaffected.
• The changes made to the SYSTEM menu contents
are recorded also by pressing the MENU button to
close the menu screen.