6
Redo White and Black Balances
14. In this order perform a new white balance, black balance and white balance again. Note, if
AWB is not working, make sure WB is not on Preset. Select memory A or B on the toggle
switch.
Confirm Low, Mid and High Settings
15. Confirm your Low, Mid and High settings in the Paint Menu. This sets the setting related to
the Low, Mid and High toggle switch positions. Matrix table A and B are set to the same
settings. So, if you use table A, B can serve as a back up if table A settings were changed and
you want to go back.
Gamma Settings
16. The Default Gamma is set to HD with master gamma set to .45.
17. You can change the gamma as desired using the Gamma menu found in the Paint menu.
18. For example, you want to match a VariCam V-Look, you can use one of the Filmlike Gammas
found in the gamma menu. Note, you can also adjust Gamma by using the master gamma
control. Higher number adds contrast, lower number lowers contrast. Note, this not the same
as a Filmlike gamma.