7
Supplied Accessories (AJ-PCD35P/AJ-PCD35E/EJ)
Operating Environment Required for Installation
To operate the P2 drive, the following environment is required on the host computer.
z
Empty slot(s) (full height) for the PCI Express : 1 or more
To mount the each P2 drive in a personal computer, 1 empty slot is required. It is possible to connect
up to 2 units.
Operation may not be possible with graphic card slots.
The following environment is recommended for the host computer to make full use of the features of P2
drive.
z
A striping configuration using 4 or more hard disk drives is recommended to attain sufficient transfer
speed when transferring data to the hard disk drive.
AC adapter
PCI Express board
Mounting
screws (8)
Power cable for AC adapter
PCI Express cable
Rubber feet (4)
Power switch box (AJ-PCD35EJ only)
CD-ROM
For AJ-PCD35P
For AJ-PCD35E/EJ
(U.K.)
For AJ-PCD35E/EJ
(continental Europe,etc)
AJ-PCD35P_E_EJ(VQT1X46-5)_E.book 7 ページ ２０１３年３月１９日 火曜日 午前９時５８分
