E-8
EN
G
L
IS
H
Installation
(continue)
To Connect the P2 drive to a Personal Computer for External Use
1
Attach the rubber feet to the dimples on the
base of the P2 drive.
2
Start the personal computer.
3
Plug the AC adapter supplied with the P2
drive into the DC IN 16V socket on the P2
drive.
The P2 drive will start.
4
(To be connected by USB 2.0)
Plug a USB 2.0 cable B connector into the
USB connector on the P2 drive. then plug the
other end (A connector) of the USB 2.0 cable
into the USB 2.0 port on the personal
computer.
<Note>
No USB 2.0 cable is supplied with the P2
drive in the package. Use a commercially
available USB 2.0 cable (shielded).
Take care to use a USB cable that is no
longer than 3 metres. The P2 drive may not
operate properly with a cable longer than 3
metres.
For Macintosh, USB 2.0 operations are not
guaranteed.
Dimples
U
S
B 2.0
DC IN 16V
DC IN 12V
IEEE 1
3
94
b
U
S
B 2.0
DC IN 16V
DC IN 12V
IEEE 1
3
94
b
USB 2.0 connector
P_AJ-PCD20.book 8 ページ ２００６年６月２８日 水曜日 午前９時４９分
