Panasonic AJ-HPX3100G Operating Instructions Manual Download Page 32

Page: 32 / 208

Recording and Playback: P2 Cards

Note

When using the camera-recorder for the first time, be sure to
set the time data beforehand.

On how the time data is set, see [Setting Time Data] (page 62).

Turn on the POWER switch.

Open the card slot cover.

Insert a P2 card into the P2 card slot until the
EJECT button pops up.

Push the eject button that pops up to the right.

Insert a P2 card into camera-recorder. The P2 CARD
ACCESS LED for the appropriate slot indicates the
status of the P2 card.

[P2 CARD ACCESS LED and Status of P2 cards]
(page 33).

Close the slot cover.

Notes

To prevent cards from falling out, dust from entering
and reduce the risk of exposure to static electricity,
close the card slot cover before moving the camera.

Format P2 cards only on a P2 card device.

Inserting P2 Cards

POWER: ON

Card slot cover

EJECT button

Insert the card
with the logo
facing up.

P2 CARD
ACCESS
LED

Recording and Playback

P2 Cards

AJ-HPX3100G(VQT3A79)_E.book 32 ページ２０１０年９月１７日　金曜日　午後９時２１分

Summary of Contents for AJ-HPX3100G

















































































































































































































Search results

Summary of Contents for AJ-HPX3100G

Reviews:

Related manuals for AJ-HPX3100G

Brands by name

Popular brands

Panasonic AJ-HPX3100G, Operating Instructions Manual

Search results

Summary of Contents for AJ-HPX3100G

Reviews:

Related manuals for AJ-HPX3100G

Brands by name

Popular brands