61
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Adjus
tm
e
n
ts an
d Settin
g
s f
o
r
Recor
d
ing
In addition to video images, the viewfinder displays lamps and text that indicate the settings and operating status of the
unit, together with messages, a center marker, a safety zone marker and the camera ID.
The above viewfinder is the AJ-VF20WBP (for further
information on your optional viewfinder model, see the
relevant instruction manual).
1.
TALLY/REC (recording) Lamp
This lamp stays illuminated during recording, and
starts blinking if any abnormal action occurs.
For more information, see [Warning System] (page
133).
2.
Abnormal Operating Status Warning Lamp
This lamp comes on when the unit is in any of the
abnormal operating statuses specified through the
menu sub-option !LED.
For statuses that activate the lamp, see the options in
the <!LED> screen in [!LED] (page 157).
3.
BATT (battery) Lamp
This lamp starts blinking a few minutes before the
battery charge starts to run out, and stays illuminated
after the battery is completely flat. The battery should
be replaced before it is nearly flat, so that operation
will not be interrupted.
For more information, see [Warning System] (page
133).
4.
SAVE Lamp
In the normal setting:
The lamp stays on when the SAVE switch is positioned
at [ON] and the output of video and audio is power-
saved.
When the menu option SAVE LED is set to “P2
CARD”:
The lamp starts blinking when the P2 card remaining
free space is getting low.
The menu option SAVE LED can be found in the <VF
INDICATOR2>, which is accessible from the VF page.
5.
50 (50-Mbps recording/playback) Lamp
This lamp stays illuminated when the unit is set to the
DVCPRO50 (50 Mbps) format, and when playback is
being performed in the DVCPRO50 format.
Note that the lamp is factory-disabled. For more
information, see the relevant section of the menu
option 50M INDICATOR in [VF DISPLAY] (page 154).
To select the information items you want to have displayed
in the viewfinder screen, go to the <VF INDICATOR1> and
<VF INDICATOR2> screens from the VF page, and turn on
or off the appropriate options, or specify desired values.
For directions on setting the options, see [Setting Menu
Options] (page 139).
Viewfinder Screen Status Displays
Lamps in the Viewfinder Screen
1
2
3
4
5
Selecting Viewfinder Display Information
#
< VF INDICATOR1 >
EXTENDER :ON
SHUTTER :ON
FILTER :ON
WHITE :ON
GAIN :ON
IRIS :S+IRIS
CAMERA ID :BAR
ID POSITION :UPPER L
DATE/TIME :OFF
ZOOM LVL :ON
COLOR TEMP :ON
CAMERA MODE :ON
#
< VF INDICATOR2 >
P2CARD REMAIN :ON
BATTERY :ON
AUDIO LVL :ON
TC :OFF
SYSTEM INFO :NORMAL
SYSTEM INFO CANCEL :ON
SAVE LED :SAVE
DV :ON
VOICE MEMO :ON
REC STATUS :OFF
PROXY REC :OFF
AJ-HPX2100E(English).book 61 ページ ２００６年１１月２７日 月曜日 午後４時３４分
