106
Manipulating Clips with Thumbnails : Text Memo
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU button and select THUMBNAIL
>
TEXT MEMO CLIPS from the thumbnail menu.
The clip thumbnails with text memos attached are
displayed in the upper section of the LCD monitor.
The lower section of the LCD monitor shows
information about the text memo on the clip selected
by the pointer.
3
Move the pointer over the clip that contains the
desired text memo to playback and press the SET
button.
The pointer moves to the lower part of the LCD
monitor.
4
With the pointer located in the lower part, move the
pointer to the desired time stamp number using the
cursor right and left buttons (
"!
). Then, press the
PLAY button.
5
Playback will start from the time code position of the
text memo where the pointer is located. If the STOP
button is pressed during playback or the playback has
finished at the end of the clip, then the thumbnail
screen appears again with the pointer replaced with
the time code where the playback started.
6
Press the MENU button to select EXIT or press the
EXIT button to return the pointer to the upper part of
the thumbnail screen.
1
Select the desired text memo by carrying out steps
1
-
3
for [Playing back a clip at the position where a text
memo is recorded] (page 106).
2
Move the pointer to the desired text memo, and then
press the SET button.
3
Press the MENU button to select OPERATION
>
DELETE from the menu.
YES and NO appear to confirm deletion. Use the
cursor buttons and the SET button to select YES.
The text memo is deleted.
Playing back a clip at the position where a text memo is recorded
Thumbnail
Display
Shows the total number of text
memos attached to the clip.
Shows the still image that the
text memo is related to.
The pointer moves down.
Deleting a text memo
AJ-HPX2100E(English).book 106 ページ ２００６年１１月２７日 月曜日 午後４時３４分
