Panasonic AJ-HDX400P, Operating Instructions Manual

Page: 100 / 102

Chapter 8 Specifications
100
Tape Transport System
Tape speed:
67.640 mm/sec
Recording time:
33 minutes (when AJ-HP33EMG is used)
Fast forwarding time:
Approx. 1 min. 30 sec. (when AJ-HP33EMG is used)
Rewinding time:
Approx. 1 min. 30 sec. (when AJ-HP33EMG is used)
[CONNECTOR SECTION]
Audio Input Connectors
AUDIO IN CH1/CH2 (XLR
a
2, 3 pins):
LINE/MIC/MIC + 48 V switching type
LINE: +4 dBu (0 or +4 dBu, selected on menu)
MIC: –60 dBu (–60 or –50 dBu, selected on menu)
MIC + 48 V:
Phantom power 48 V supported,
–60 dBu (–60 or –50 dBu, selected on menu)
MIC IN (XLR, 5 pins):
P 48 V:
ON or OFF, 3 k
Ω
, balanced, –50 or –40 dBu, selected
on menu
WIRELESS IN (25 pins):
D-SUB, –40 dBu
Audio Output Connectors
AUDIO OUT CH1/CH2 (XLR, 5 pins):
+4 dBu (0 or +4 dBu, selected on menu, balanced low
impedance)
Earphone (stereo mini jacks
a
2)
Video Input Connector
GEN LOCK IN (BNC):
1.0 Vp-p, 75
Ω
Video Output Connector
HD SDI (BNC):
0.8 Vp-p, 75
Ω
VIDEO OUT (BNC, DOWNCON):
1.0 Vp-p, 75
Ω
Time Code Input Connector
TC IN (BNC):
0.5 to 8 Vp-p, high impedance
Time Code Output Connector
TC OUT (BNC):
2.0 Vp-p, low impedance
Other Connectors
DC IN (XLR, 4 pins, male):
DC 12 V (DC 11 to 17 V)
DC OUT (4 pins):
DC 12 V (DC 11 to 17 V), max. 1 A
LENS (multi 12 pins)
EVF (multi 20 pins)
GPS (6 pins, connector used for AJ-GPS900G)
ECU (6 pins, connector used for AJ-EC3P)
[ACCESSORIES]
Shoulder strap
Control knob
Screw (M2
a
6 mm) (XYNZ + J6FZ)
a
1