4
Chapter 4 Adjustments and settings for recording
31
AUDIO LEVEL
CH1, CH2 controls
AUDIO SELECT
CH1, CH2 buttons
MONITOR SELECT
CH1/2
O
CH3/4 switch
MONITOR
CH1/3
O
ST
O
CH2/4
selector switch
Display window
4-3 Selecting the recording signals
and recording system
With this unit, both the signals to be recorded and the
recording format can be selected.
4-3-1 Selecting the recording signals
Open the <SYSTEM MODE> screen from the SYSTEM
SETTING page and select the signals to be recorded using
the CAMERA MODE item by performing menu operations.
1
Press the SHUTTER switch from ON to SEL to establish
the SYNCHRO SCAN mode.
2
In the SYNCHRO SCAN mode, it is possible to change
the shutter speed continuously within a range from 1/50.2
sec. to 1/209.4 sec. (50i mode) by operating the
SYNCHRO SCAN (+ and –) buttons.
4-2-3 Setting the synchro scan mode
Proceed with operation by following the steps below.
SYNCHRO SCAN (+ and –) buttons
SHUTTER switch
#
< SYSTEM MODE >
CAMERA MODE :50i
Items to be set and what is set
Using the CAMERA MODE item, the operation mode of the
camera to be used for recording is selected.
50i:
The unit’s camera is operated in the 50i mode.
25P:
The unit’s camera is operated in the 25P mode.
<Notes>
≥
When 25P has been selected and the camera is used, the
images produced will be 25P segment frame images, so
true 25P editing will be possible.
≥
In the 25P mode, the shutter is forcibly set to 50% (1/50
sec) to produce more film-like moving images. To release
the shutter mode, it is necessary by performing menu
operations to open the <OPTION> screen and select OFF
as the P.HALF SHUT item setting.
However, this should be done carefully since the dynamic
range will be halved in the process.
4-4 Selecting the audio input signals
and adjusting their recording
levels
When the AUDIO SELECT CH1/CH2 switch is set to AUTO,
the recording levels on audio tracks CH1 and CH2 are
adjusted automatically. On the other hand, when it is set to
MAN, the levels can be adjusted manually. The recording
levels on audio tracks CH3 and CH4 can be selected using
the menu.
4-4-1 Selecting the audio input signals
Use the AUDIO IN switch to select the input signals to be
recorded on audio tracks CH1, CH2, CH3 and CH4.
For details, refer to “2-2 Audio function section.”
01.AJ-HDX400E(VQT0P57)E 05.1.20 15:50 ページ31
