manualshive.com logo in svg

Panasonic AJ-HD1500P, Operating Instructions Manual

Share
Download
Panasonic AJ-HD1500P Operating Instructions Manual Download Page 98

– 98 –

Setup menus

USER menu

<AUDIO>

 (continued)

Item

Setting

No.

Superimposed

No.

Superimposed

Description

display

display

737

CH1 MONI

0000

          OFF

SEL

0001

ON

738

CH2 MONI

0000

          OFF

SEL

0001

ON

739

CH3 MONI

0000

          OFF

SEL

0001

ON

740

CH4 MONI

0000

          OFF

SEL

0001

ON

741

CH5 MONI

0000

          OFF

SEL

0001

ON

742

CH6 MONI

0000

          OFF

SEL

0001

ON

743

CH7 MONI

0000

          OFF

SEL

0001

ON

744

CH8 MONI

0000

          OFF

SEL

0001

ON

The underline on the setting item denotes the initial setting.

This selects the output status of the main line of CH1 in the
search mode.
0: Output is not aligned with the monitor output (L ch).
1: Output is aligned with the monitor output (L ch).

<Note>

For details on audio output status, refer to “Audio output in the
search mode” on page 101.

This selects the output status of the main line of CH2 in the
search mode.
0: Output is not aligned with the monitor output (R ch).
1: Output is aligned with the monitor output (R ch).

<Note>

For details on audio output status, refer to “Audio output in the
search mode” on page 101.

This selects the output status of the main line of CH3 in the
search mode.
0: Output is not aligned with the monitor output (L ch).
1: Output is aligned with the monitor output (L ch).

<Note>

For details on audio output status, refer to “Audio output in the
search mode” on page 101.

This selects the output status of the main line of CH4 in the
search mode.
0: Output is not aligned with the monitor output (R ch).
1: Output is aligned with the monitor output (R ch).

<Note>

For details on audio output status, refer to “Audio output in the
search mode” on page 101.

This selects the output status of the main line of CH5 in the
search mode.
0: Output is not aligned with the monitor output (L ch).
1: Output is aligned with the monitor output (L ch).

<Note>

For details on audio output status, refer to “Audio output in the
search mode” on page 101.

This selects the output status of the main line of CH6 in the
search mode.
0: Output is not aligned with the monitor output (R ch).
1: Output is aligned with the monitor output (R ch).

<Note>

For details on audio output status, refer to “Audio output in the
search mode” on page 101.

This selects the output status of the main line of CH7 in the
search mode.
0: Output is not aligned with the monitor output (L ch).
1: Output is aligned with the monitor output (L ch).

<Note>

For details on audio output status, refer to “Audio output in the
search mode” on page 101.

This selects the output status of the main line of CH8 in the
search mode.
0: Output is not aligned with the monitor output (R ch).
1: Output is aligned with the monitor output (R ch).

<Note>

For details on audio output status, refer to “Audio output in the
search mode” on page 101.

Summary of Contents for AJ-HD1500P































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands