– 12 –
Controls and their functions
<Front Panel Center Section>
X
X
X
X
X
Counter display area
The TC and CTL count values, UB and messages are displayed in this area.
Cassette inserted display lamp:
This lamp lights when a cassette has been inserted into the unit.
DV lamp:
This lights when a cassette recorded using the DV (SP mode) format is being played back.
DVCAM lamp:
This lights when a cassette recorded using the DVCAM format is being played back.
DVCPRO lamp:
This lights when a cassette recorded using the DVCPRO format is being played back.
DVCPRO50 lamp:
This lights when a cassette recorded using the DVCPRO50 format is being played back.
DVCPRO50P lamp:
This lights when a cassette recorded using the DVCPRO50p format is being played back.
LP lamp:
This lights when a cassette is being recorded or played back using the DVCPROHD-LP
format.
SP lamp:
This lights when a cassette recorded using the DVCPROHD format is being played back.
SCH lamp:
This lights when the SCH phase of the SD REF signal is within a fixed range.
CF lamp:
This lights when the color framing is locked.
TC/UB lamp:
This flashes when the TC or UB information cannot be read during tape playback; it
remains lighted while the information is being read properly.
W lamp:
This lights when a warning has been issued.
Y
Y
Y
Y
Y
Time code buttons
These are used to set the TC or UB value.
SHIFT:
When setting the TC or UB value, first press this button to stop the data running.
Change the digit now flashing on the display.
Each time the button is pressed, the flashing moves to the right by one digit, and
when it reaches the right-most digit, it returns to the left-most digit.
When it is kept depressed, the flashing moves consecutively.
ADJ:
This is used to change the numeral of the digit now flashing on the display.
When the button is pressed once, the number is incremented by 1, and when it is
kept depressed, the number is incremented consecutively.
START:
This enters the data which has been changed by the SHIFT and ADJ buttons.
Also, Pressing this button when the TC or UB value are not set enables the TCG
or UBG setting values to be confirmed.
RESET:
When this button is pressed in the CTL mode, the display is reset to
“00:00:00:00”. In the CTL mode, the entered edit points are cleared.
In the TC/UB mode, the generator is reset when the button is pressed together
with the SHIFT button.
Z
Z
Z
Z
Z
Audio channel selector button
This button is used to switch the display and control of the CH1-CH4 or CH5-CH8 audio
meter and volume and insert buttons.
