38
Setup menus
(continued)
BASIC (continued)
*1 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
<Note>
When the signal format to be output is set to other than
DVCPRO HD and an external device is connected to the DV
connector, the following settings are recommended.
z
Menu No. 022 PB FORMAT:
MANUAL
z
Menu No. 023 FORMAT SEL:
Format of the tape that is inserted in the unit
“_____” indicates the factory setting.
No./Item
Description of setting
006
DISPLAY
SEL
For setting what the information to be superimposed.
0000
TIME :
Only the data is displayed.
(“Data” refers to the CTL, TC or UB value selected
by the COUNTER button.)
0001
T&STA :
The data and operation status are displayed.
0002
T&S&M :
The data, operation status and mode are
displayed.
0003
T&RT :
The data and REC TIME are displayed.
0004
T&YMD :
The data and REC DATE (year/month/day) are
displayed.
0005
T&MDY :
The data and REC DATE (month/day/year) are
displayed.
0006
T&DMY :
The data and REC DATE (day/month/year) are
displayed.
0007
T&UB :
The data and user bits are displayed. The time
code is displayed after the user bits when the
COUNTER button is set to UB.
0008
T&CTL :
The data and CTL are displayed. The time code is
displayed after the CTL data when the COUNTER
button is set to CTL.
0009
T&T :
The data and time code are displayed.
<Notes>
z
Depending on the format used, the following
displays appear for the modes.
<Format>
>
<Display>
DVCPRO HD-LP
>
DVCPRO_HD-LP
DVCPRO HD
>
DVCPRO_HD
DVCPRO50
>
DVCPRO_50
DVCPRO
>
DVCPRO
DV
>
DV
DVCAM
>
DVCAM
z
When T&S&M is selected as the item setting, an
error message is superimposed onto the display
when a warning or error occurs.
z
REC TIME and REC DATE are displayed only
during DV or DVCAM playback. The operation
mode is displayed with the DVCPRO HD-LP,
DVCPRO HD, DVCPRO50 or DVCPRO format.
007
CHARA
H-POS
For setting the horizontal position at which the
superimposed characters are to be displayed.
0000
0
: :
0006
6
: :
0037
37
<Note>
Press the joystick and tilt up/down and right/left to set
the character position.
008
CHARA
V-POS
For setting the vertical position at which the
superimposed characters are to be displayed.
0000
0
: :
0023
23
: :
0032
32
<Note>
Press the joystick and tilt up/down and right/left to set
the character position.
No./Item
Description of setting
009
CHARA
TYPE
For setting the superimposed display and menu
display type.
0000
WHITE :
White characters are displayed on a black
background.
0001
W/OUT :
White characters with black edges are displayed.
020*
1
SYS FORMAT
For setting the format in which to record or play back
the signals including the HD REF signals.
0000
1080i :
1080i mode
0001
720p :
720p mode
022
PB FORMAT
For setting the format in which to play back the tape.
0000
MANUAL :
The tape is played back in the format selected by
the menu item No.020 SYS FORMAT and No.023
FORMAT SEL setting.
0001
AUTO :
The tape is played back in the format selected by
the format in which the tape was recorded.
023
FORMAT SEL
For selecting the format when “MANUAL” is selected
as the menu item No.022 PB FORMAT setting.
0000
HD_LP :
The DVCPRO HD-LP format is selected, and the
format follows the menu item No.020 SYS
FORMAT setting.
0001
HD_SP :
The DVCPRO HD format is selected, and the
format follows the menu item No.020 SYS
FORMAT setting.
0002
422 :
The DVCPRO50 (422) format is selected.
0003
411 :
The DVCPRO (411) format is selected.
0004
DV :
The DV format is selected.
0005
DVCAM :
The DVCAM format is selected.
