11 (E)
ENGLISH
BREAKER
INCOM
MIC
POWER
RCU
BATT
ON
OFF
DM
CM
Setting the internal switch
1
Remove the four screws, and take off the side
panel.
<Notes>
O
The screws cannot be removed from the side
panel.
O
Take care not to disengage the drip-proof rubber
part used for the POWER switch.
O
The side panel is connected to the main unit by
a cable. Do not pull it using excessive force.
2
Select the position of the switch on the back side of
the side panel.
Screws
Side panel
Drip-proof rubber part
Dynamic type
Carbon type
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire
or electric shock do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
Select the microphone to be used for INCOM (Inter-
Communication).
CM (carbon type) is the factory setting.
Summary of Contents for AJ-CA905G
