9 (E)
ENGLISH
Attaching the battery pack
NP-1 type battery pack
1
Remove the battery holder.
2
Attach the NP-1 connector provided as an
accessory.
1
3
4
2
3
Attach the NP-1 type battery case to the unit.
1
Tighten the case mounting screws (8 mm).
2
Tighten the power contact screws.
3
Insert the top of the detached cover in the
direction shown by the arrows.
4
Align the holes in the bottom of the cover (metal
part) with the holes at the bottom of the case,
and use the screws to attach the case.
<Note>
When mounting the battery case, take care not to
pinch the connecting cord.
Connect here.
NP-1 connector
Connector mounting
screws (4 mm)
Battery holder
Summary of Contents for AJ-CA905G
