- 6 -
Parts and their functions
Front panel
a
MONI SEL switch
This switch is used to switch the signals output from the
PIX and WFM jacks on the rear panel of the AJ-BS900P.
_
KNEE POINT knob
This knob is used to set the manual knee point.
`
DETAIL knob
This knob allows adjustment of the master DETAIL setting.
^
GAMMA knob
This knob is used to change the camera’s master gamma
setting.
b
SET UP button
This button is used to make camera settings.
When it is lighted, menus are displayed at PIX OUT.
c
SET UP dial
This dial is used to select settings on the setting menus.
After selecting the desired setting by turning the dial, press
to enter it.
Menu settings can be performed when the
b
SET UP
button is lighted.
When the
b
SET UP button is not lighted, the SYNCHRO
SCAN speed can be set; when SYNCHRO SCAN is
selected.
e
Shutter speed selector switch
This switch is used to select the shutter speed. The
available settings are SYNCRO SCAN Super V and 1/100
to 1/2000.
Moving the switch when the SHUTTER button is in the off
position will not cause the shutter to operate.
d
SHUTTER button
This button activates the operation performed using the
shutter speed selector switch
e
. It should be put into the
on position when using an electronic shutter.
[
! indicator
This lights when the lens extenders (x2) are used with the
camera.
]
KNEE SLOPE knob
This knob is used to set the manual knee slope.
R
PAINTING ENABLE button
This button is used to enable painting (gain knob
S
and
black knob
T
) operation.
V
AUTO IRIS button
This button is used to toggle auto iris operation on and off.
Lit:
Auto iris operation on.
Dark:
Auto iris operation off.
W
LED digital indicator
This indicator displays the F value of the lens.
When changes are made to the gain or filter settings, the
corresponding values are displayed for about two seconds.
Also, pressing the CHECK button Z toggles the display in
sequence among the gain, filter, and F values.
<Note>
“---” appears when the camera recorder’s power is OFF.
U
IRIS knob
When the AUTO IRIS button
V
is in the on position, the
value selected using this knob is added or subtracted to the
IRIS LEVEL setting in the USER MENU.
When the AUTO IRIS button
V
is in the off position, this
knob is used to perform adjustment of the iris setting.
<Note>
Set the lens manual/auto selector switch to AUTO.
Y
FILTER indicator
This indicator lights when the filter position is shown by the
LED digital indicator.
X
GAIN indicator
This indicator lights when the gain value is shown by the
LED digital indicator.
\
M PED knob
This knob is used to adjust the master pedestal setting.
Z
CHECK button
Pressing this button multiple times causes first the GAIN
indicator and then the FILTER indicator to light. When the
GAIN indicator is lit the LED digital indicator shows the filter
position, and when the FILTER indicator is lit the LED
digital indicator shows the gain value.
S
GAIN knobs
These are the R and B gain adjustment knobs.
T
BLACK knobs
These are the R and B pedestal adjustment knobs.
P
AUTO KNEE button
This button is used to toggle auto knee operation on and
off.
Lit:
Auto knee operation on.
Dark:
Auto knee operation off.
Q
GAIN buttons
These buttons are used to switch the camera’s gain setting.
