15
C
h
ap
te
r 2 P
ar
ts a
n
d t
h
eir F
u
n
ct
io
n
s
Chapter
2
Parts and their
Functions
Power Supply and Accessory Mounting Section
1
POWER switch
Used to turn on/off the power.
2
Battery mount
A battery pack from Anton/Bauer is mounted
here.
3
DC IN (external power input) socket (XLR,
4P)
This unit is connected to an external DC power
supply (DC12 V).
4
BREAKER switch
When an excessive amount of current is fed
through the video camera-recorder, due to any
abnormal event, the breaker automatically turns
off the power in order to protect the device.
After the interior of the video camera-recorder
has been checked and/or repaired, this button
must be depressed. If there is no unusual
reaction, the unit can be powered-up.
5
Light shoe
A video light or similar accessory can be attached
here.
6
Shoulder strap fittings
The shoulder strap is attached here.
7
Lens mount (bayonet type)
The lens is attached here.
8
Lens lever
Lower this lever to lock the lens to the lens mount.
9
Lens mount cap
To remove the cap, raise the lens lever.
When the lens is not mounted, replace the cap.
10
Lens cable/microphone cable clamp
This clamp secures the lens and microphone
cables.
11
Tripod mount
When you want to mount the AG-HPX500P/E
on a tripod, the optional tripod adapter (SHAN-
TM700) is attached here.
12
LENS jack (12-pin)
The lens connection cord is connected here.
For a detailed description of your lens, see the
relevant manufacturer’s instruction manual.
13
Release lever
Pull down the release lever to release the battery
pack.
14
Viewfinder left-right positioning ring
For details, see [Adjusting Viewfinder Right-Left
Position].
15
Light control switch
For details, refer to [Power Supply].
1
4
3
5
2
6
5
12
11
7
10
8
9
15
13
14
