E-9
ENGLISH
Motion Picture
Interface Unit
Settings for the interface unit
SDI Remote
Recording
Select whether to output control information for recording start/stop to
the external equipment connected to this unit’s SDI OUT terminals.
y
y
[ON]:
Enable the function.
y
y
[OFF]:
Disable the function.
LED Brightness
Specify the brightness of the level meters.
y
y
[HIGH], [LOW]
3G-SDI Type
Select the type of signal that will be used when outputting 3G-SDI
signals.
y
y
[LEVEL A], [LEVEL B]
Low Battery Alert
Select the voltage at which to display the low battery (voltage decline)
warning for the DC power battery.
y
y
[11V], [12.5V], [13.5V], [15V]
The
indicator will turn red and blink before the battery charge is
empty.
Replace the battery when the battery charge is low and “Interface
Unit: Low Battery Alert” is displayed.
Setup
Version Disp.
Display the firmware version of the unit that is added.
In addition, some settings in the following menu items will be restricted when the unit is mounted
on the digital camera.
Setup
Motion Picture
TV Connection
y
y
HDMI Mode (Play):
• When [AUTO] is selected, the output
resolution is set automatically based on the
recorded format (resolution).
• When a setting other than [AUTO] is
selected, timecodes are not superimposed
on SDI outputs.
y
y
3D Playback:
Fixed at [2D].
y
y
VIERA Link:
Fixed at [OFF].
HDMI Rec Output
y
y
4K Down Convert:
[AUTO] cannot be selected.
Additional Menus
(continued)
