background image

37 (E)

Effect-by-effect setting screens

[Title Key] setting

The title key is opened directly or when selected using the number keys.  It is not displayed when Page is 0.  The number of
frames (number of pages) that can be stored in the memory for PC Title can be set on the [Setup] screen.

Pos.

X 128 Y 128
Z

196

Event

ME Time

Pattern

INT

00

E

10:00

F

9501

Wht

Title Key

Still

Key

Effects

Off

Crop

A

2

8

12

7

12

DVE

Plus

Off

6301

3D

Modify

Rotate

0

Time

0

TransF

255

Slice

0

Slope

0

K Level

255

Still
Crawl
Roll
Movie

Scrolled

display

Displayed only
with 3Dop

Displayed by DVEPlus
only with special
patterns

[Key] setting

The playback type of the title is displayed in the top section.
The [Slice] level can be set to any value from 0 to 255 using the rotary 3 control.  The default setting is 0.
[Slope] can be set to any value from 0 to 15 using the rotary 4 control.  The default setting is 0.
The key level can be set to any value from 0 to 255 using the rotary 5 control.  This can be set separately from the other
keys.  The default setting is 255.
The crop setting can also be set separately from the other keys.  Effects can be added for the effect settings in the same way
as for other patterns.  The settings are performed as with the DVE’s chroma key.

<Note>

The title key cannot be selected during DSK execution.

R1

R2

R3

R4

R5

6

A

Border

Color

White

Summary of Contents for AG-MX70E






































































































Reviews: