1
Chapter
Manipulating
Clips
with
Thumbnails
REC RATE:
The recording frame rate is displayed. (Only
displayed for clips recorded using native recording
with the VFR function.)
5 Clip Meta Data
Displays more detailed data about the clip. Use the
cursor buttons to move the pointer, and press the
SET button to check the detailed content. For more
information on displayed metadata, see [Setting of Clip
Meta Data] (page 115).
Modification of recorded clip metadata
1
Displaythewindowfordetailedclipmetadata
thatyouintendtomodifyintheclipproperties
window.
2
Placethecursorontheitemtobemodified
usingthecursorbutton.
• The metadata that can be modified are shown like
[CREATOR] in the following figure.
3
PresstheSETbutton.
• The input window (soft keyboard) for modifying
metadata is displayed.
• Use the keyboard to modify the metadata.
Use the keyboard operations described in
[Checking and modifying read metadata]
(page 116).
4
PressOKonthekeyboardtowritethemodified
metadataontheclipandreturntothemetadata
window.
NOTE
• LOCATION (recording location data) data for a SHOOT cannot
be deleted independently. Thus by setting ALTITUDE to empty
will also delete the LONGITUDE and LATITUDE settings.
• The metadata for a clip with the
!
incomplete clip indicator
cannot be modified. Metadata on clips recorded on multiple
P2 cards must be modified when all P2 cards that contain the
data are inserted.
• Any MEMO with 101 characters or more cannot be modified.
P2 Card Status Display
P2 Card Status Display Settings
Select PROPERTY
CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
PresstheTHUMBNAILbutton.
• The thumbnail screen appears on the LCD
monitor.
2
PresstheTHUMBNAILMENUbuttonand
selectPROPERTY
PROPERTYSETUP
PCARDCAPfromthethumbnailmenu.
• The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP
menu option.
REMAIN:
Show remaining free space on the P2 card as
the P2 card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as
the P2 card status display.
