24
The remote control
Insert the battery
1
Push the catch in the direction shown by
arrow
1
to remove the holder.
2
Insert the battery with the “+” marked side
facing up.
3
Return the holder to its original position.
• When the battery (CR2025) has run out, replace
it with a new one. (The battery lasts about one
year, depending on the frequency of use.) If the
remote control unit fails to work even when it
is operated near the camera-recorder’s remote
control sensor, the battery has run out.
• Keep the battery out of the reach of children.
Remote control setup
When using two camera-recorders simultaneously,
set this camera-recorder and the remote control to
either “operation mode 1” or “operation mode 2”
so the remote control does not operate the wrong
camera-recorder by mistake.
Setting
• Wireless remote control
Press the operation buttons STOP (
) and STILL
ADV ( ) at the same time to set the remote
control unit for use in “operation mode 1”.
Alternatively, press the STOP (
) and STILL ADV
( ) buttons at the same time to set the remote
control unit for use in “operation mode 2”.
When the battery in the remote control unit is
replaced, the remote control unit is set for use in
“operation mode 1”.
• Camera-recorder
In the setup menus, OTHER FUNCTIONS
screen, REMOTE, set to 1 or 2. (Page 151 of Vol. 2)
If different settings are used for the camera-
recorder and remote control unit, “REMOTE” lights
in red on the viewfinder and LCD monitor.
Operation
mode 2
Operation
mode 1
