18
1 Tally lamp (Front)
(Page 9 of Vol. 2)
2 Remote control sensor (Front)
(Page 24)
3 White balance sensor
(Page 32 of Vol. 2)
4 Built-in speaker
5 Lens cap
(Page 23)
6 Lens hood
(Page 22)
7 Viewfinder
(Page 6 of Vol. 2)
8 OPEN lever of P2 card/SD memory card slot
cover
(Page 10 of Vol. 2, Page 15 of Vol. 2)
9 P2 card/SD memory card slot cover
(Page 10 of Vol. 2, Page 16 of Vol. 2)
10 USB 2.0 terminal (HOST)
(Page 102 of Vol. 2)
11 USB 2.0 terminal (DEVICE) (Mini-B)
(Page 102 of Vol. 2)
12 HDMI OUT terminal
(Page 104 of Vol. 2)
13 DVCPRO/DV terminal
(Page 105 of Vol. 2)
14 TC IN/OUT terminal
(Page 67 of Vol. 2)
15 Headphone jack (3.5 mm stereo mini jack)
(Page 101 of Vol. 2)
16 CAM REMOTE jack*
FOCUS/IRIS
(3.5 mm mini jack)
You can connect a remote control unit to
control the FOCUS and IRIS (aperture).
ZOOM S/S
(2.5 mm super mini jack)
You can connect a remote control unit
(optional) to control zoom and start/stop of
recording.
Front and rear side
* Do not connect any equipment except the
remote controller to the CAM REMOTE jack.
Connecting any equipment other than
the remote control may cause the image
brightness to change and/or the images to
appear out of focus.
17 SDI OUT terminal
(Page 103 of Vol. 2)
18 GENLOCK IN terminal
(Page 67 of Vol. 2)
19 P2 card eject button
(Page 10 of Vol. 2)
20 SD memory card access lamp
(Page 16 of Vol. 2)
21 SD memory card slot
(Page 16 of Vol. 2)
22 P2 card slot
(Page 10 of Vol. 2)
23 Tally lamp (Rear)
(Page 9 of Vol. 2)
24 Remote control sensor (Rear)
(Page 24)
25 P2 card access lamp (x 2)
(Page 15 of Vol. 2)
26 USER4 button
(Page 39 of Vol. 2)
27 Protective caps
Keep the protective caps fitted over any
connectors that are not being used.
28 Battery compartment
(Page 21)
29 Battery release button
(Page 21)
USB2.0
USB2.0
1 2 3
4
5
6
7
8
9
15
16
12
10
11
14
13
17
18
23 24 25 26
28
27
29
20
19
21
22
Description of parts (continued)
